Fix misaligned and over 80-character comments.
Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx>
---
drivers/usb/dwc2/core.h | 19 ++++++++++---------
drivers/usb/dwc2/gadget.c | 43 +++++++++++++++++++++++--------------------
drivers/usb/dwc2/hcd.c | 2 +-
drivers/usb/dwc2/hcd_intr.c | 37 +++++++++++++++++++++----------------
4 files changed, 55 insertions(+), 46 deletions(-)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 5d9a9a5..72f604d 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -603,8 +603,8 @@ struct dwc2_hw_params {
#define DWC2_CTRL_BUFF_SIZE 8
/**
- * struct dwc2_gregs_backup - Holds global registers state before entering partial
- * power down
+ * struct dwc2_gregs_backup - Holds global registers state before
+ * entering partial power down
* @gotgctl: Backup of GOTGCTL register
* @gintmsk: Backup of GINTMSK register
* @gahbcfg: Backup of GAHBCFG register
@@ -634,8 +634,8 @@ struct dwc2_gregs_backup {
};
/**
- * struct dwc2_dregs_backup - Holds device registers state before entering partial
- * power down
+ * struct dwc2_dregs_backup - Holds device registers state before
+ * entering partial power down
* @dcfg: Backup of DCFG register
* @dctl: Backup of DCTL register
* @daintmsk: Backup of DAINTMSK register
@@ -664,8 +664,8 @@ struct dwc2_dregs_backup {
};
/**
- * struct dwc2_hregs_backup - Holds host registers state before entering partial
- * power down
+ * struct dwc2_hregs_backup - Holds host registers state before
+ * entering partial power down
* @hcfg: Backup of HCFG register
* @haintmsk: Backup of HAINTMSK register
* @hcintmsk: Backup of HCINTMSK register
@@ -782,9 +782,10 @@ struct dwc2_hregs_backup {
* @gadget_enabled Peripheral mode sub-driver initialization indicator.
* @ll_hw_enabled Status of low-level hardware resources.
* @phy: The otg phy transceiver structure for phy control.
- * @uphy: The otg phy transceiver structure for old USB phy control.
- * @plat: The platform specific configuration data. This can be removed once
- * all SoCs support usb transceiver.
+ * @uphy: The otg phy transceiver structure for old USB phy
+ * control.
+ * @plat: The platform specific configuration data. This can be
+ * removed once all SoCs support usb transceiver.
* @supplies: Definition of USB power supplies
* @phyif: PHY interface width
* @lock: Spinlock that protects all the driver data structures
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 774cb81..6c655de 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -581,11 +581,11 @@ static unsigned int get_ep_limit(struct dwc2_hsotg_ep *hs_ep)
}
/**
-* dwc2_hsotg_read_frameno - read current frame number
-* @hsotg: The device instance
-*
-* Return the current frame number
-*/
+ * dwc2_hsotg_read_frameno - read current frame number
+ * @hsotg: The device instance
+ *
+ * Return the current frame number
+ */
static u32 dwc2_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
{
u32 dsts;
@@ -1467,8 +1467,11 @@ static int dwc2_hsotg_process_req_status(struct dwc2_hsotg *hsotg,
switch (ctrl->bRequestType & USB_RECIP_MASK) {
case USB_RECIP_DEVICE:
- reply = cpu_to_le16(0); /* bit 0 => self powered,
- * bit 1 => remote wakeup */
+ /*
+ * bit 0 => self powered
+ * bit 1 => remote wakeup
+ */
+ reply = cpu_to_le16(0);
break;
case USB_RECIP_INTERFACE:
@@ -2750,19 +2753,19 @@ static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep)
}
/**
-* dwc2_gadget_handle_nak - handle NAK interrupt
-* @hs_ep: The endpoint on which interrupt is asserted.
-*
-* This is starting point for ISOC-IN transfer, synchronization done with
-* first IN token received from host while corresponding EP is disabled.
-*
-* Device does not know when first one token will arrive from host. On first
-* token arrival HW generates 2 interrupts: 'in token received while FIFO empty'
-* and 'NAK'. NAK interrupt for ISOC-IN means that token has arrived and ZLP was
-* sent in response to that as there was no data in FIFO. SW is basing on this
-* interrupt to obtain frame in which token has come and then based on the
-* interval calculates next frame for transfer.
-*/
+ * dwc2_gadget_handle_nak - handle NAK interrupt
+ * @hs_ep: The endpoint on which interrupt is asserted.
+ *
+ * This is starting point for ISOC-IN transfer, synchronization done with
+ * first IN token received from host while corresponding EP is disabled.
+ *
+ * Device does not know when first one token will arrive from host. On first
+ * token arrival HW generates 2 interrupts: 'in token received while FIFO empty'
+ * and 'NAK'. NAK interrupt for ISOC-IN means that token has arrived and ZLP was
+ * sent in response to that as there was no data in FIFO. SW is basing on this
+ * interrupt to obtain frame in which token has come and then based on the
+ * interval calculates next frame for transfer.
+ */
static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep)
{
struct dwc2_hsotg *hsotg = hs_ep->parent;
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index c1bbb62..f5dc651 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3045,7 +3045,7 @@ static void dwc2_process_periodic_channels(struct dwc2_hsotg *hsotg)
* now. This function is called from interrupt
* handlers to queue more transactions as transfer
* states change.
- */
+ */
gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
if (gintmsk & GINTSTS_PTXFEMP) {
gintmsk &= ~GINTSTS_PTXFEMP;
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index d719c2f..dfeff3c 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -1389,22 +1389,27 @@ static void dwc2_hc_nyet_intr(struct dwc2_hsotg *hsotg,
int end_frnum;
/*
- * Figure out the end frame based on schedule.
- *
- * We don't want to go on trying again and again
- * forever. Let's stop when we've done all the
- * transfers that were scheduled.
- *
- * We're going to be comparing start_active_frame
- * and next_active_frame, both of which are 1
- * before the time the packet goes on the wire,
- * so that cancels out. Basically if had 1
- * transfer and we saw 1 NYET then we're done.
- * We're getting a NYET here so if next >=
- * (start + num_transfers) we're done. The
- * complexity is that for all but ISOC_OUT we
- * skip one slot.
- */
+ * Figure out the end frame based on
+ * schedule.
+ *
+ * We don't want to go on trying again
+ * and again forever. Let's stop when
+ * we've done all the transfers that
+ * were scheduled.
+ *
+ * We're going to be comparing
+ * start_active_frame and
+ * next_active_frame, both of which
+ * are 1 before the time the packet
+ * goes on the wire, so that cancels
+ * out. Basically if had 1 transfer
+ * and we saw 1 NYET then we're done.
+ * We're getting a NYET here so if
+ * next >= (start + num_transfers)
+ * we're done. The complexity is that
+ * for all but ISOC_OUT we skip one
+ * slot.
+ */
end_frnum = dwc2_frame_num_inc(
qh->start_active_frame,
qh->num_hs_transfers);
--
2.10.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
