On Tue, Nov 29, 2016 at 10:33:16AM +0800, Ji-Ze Hong (Peter Hong) wrote:
> Hi Johan,
>
> Johan Hovold 於 2016/11/24 下午 11:04 寫道:
> > On Mon, Nov 14, 2016 at 01:37:59PM +0800, Ji-Ze Hong (Peter Hong) wrote:
> >> This driver is for Fintek F81532/F81534 USB to Serial Ports IC.
>
> >> + }
> >> +
> >> + if (size_bulk_out != F81534_WRITE_BUFFER_SIZE ||
> >> + size_bulk_in != F81534_MAX_RECEIVE_BLOCK_SIZE) {
> >> + dev_err(dev, "%s: endpoints packet size not matched\n",
> >> + __func__);
> >
> > Similarly: "unsupported endpoint max packet size\n".
> >
> > But just to be clear: You do want to bail out if connected at full
> > speed? You could also ask usb-serial core to allocate large enough
> > buffers (e.g. by setting the bulk_out_size driver field) and the host
> > controller will handle partitioning.
>
> Yes, this product cannot run on USB full-speed currently due to the
> bulk-out endpoint design. It need use 512 bytes packet size to transmit
> 4 ports TX data, but USB Full-speed only provide 64 byte. The F81534
> will treat the all bulk-out data as port 0 although the host will spilt
> 512byte to 8 x 64bytes packets.
Ok, thanks for confirming. I'll just fix up the minor comments I had on
the new probe function before applying for 4.10 (so no need to resend).
Thanks for sticking with it.
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
