On Tue, Nov 22, 2016 at 04:11:47PM +0200, Heikki Krogerus wrote:
> This adds driver for the USB Type-C PHY on Intel WhiskeyCove
> PMIC which is available on some of the Intel Broxton SoC
> based platforms.
>
> Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
LGTM, though I don't really know anything about the chip.
Couple of questions below, otherwise
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> ---
> drivers/usb/typec/Kconfig | 14 ++
> drivers/usb/typec/Makefile | 1 +
> drivers/usb/typec/typec_wcove.c | 372 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 387 insertions(+)
> create mode 100644 drivers/usb/typec/typec_wcove.c
>
> diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
> index 17792f9..2abbcb0 100644
> --- a/drivers/usb/typec/Kconfig
> +++ b/drivers/usb/typec/Kconfig
> @@ -4,4 +4,18 @@ menu "USB Power Delivery and Type-C drivers"
> config TYPEC
> tristate
>
> +config TYPEC_WCOVE
> + tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver"
> + depends on ACPI
> + depends on INTEL_SOC_PMIC
> + depends on INTEL_PMC_IPC
> + select TYPEC
> + help
> + This driver adds support for USB Type-C detection on Intel Broxton
> + platforms that have Intel Whiskey Cove PMIC. The driver can detect the
> + role and cable orientation.
> +
> + To compile this driver as module, choose M here: the module will be
> + called typec_wcove
> +
> endmenu
> diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
> index 1012a8b..b9cb862 100644
> --- a/drivers/usb/typec/Makefile
> +++ b/drivers/usb/typec/Makefile
> @@ -1 +1,2 @@
> obj-$(CONFIG_TYPEC) += typec.o
> +obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o
> diff --git a/drivers/usb/typec/typec_wcove.c b/drivers/usb/typec/typec_wcove.c
> new file mode 100644
> index 0000000..953d59b
> --- /dev/null
> +++ b/drivers/usb/typec/typec_wcove.c
> @@ -0,0 +1,372 @@
> +/**
> + * typec_wcove.c - WhiskeyCove PMIC USB Type-C PHY driver
> + *
> + * Copyright (C) 2016 Intel Corporation
> + * Author: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/usb/typec.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/intel_soc_pmic.h>
> +
> +/* Register offsets */
> +#define WCOVE_CHGRIRQ0 0x4e09
> +#define WCOVE_PHYCTRL 0x5e07
> +
> +#define USBC_CONTROL1 0x7001
> +#define USBC_CONTROL2 0x7002
> +#define USBC_CONTROL3 0x7003
> +#define USBC_CC1_CTRL 0x7004
> +#define USBC_CC2_CTRL 0x7005
> +#define USBC_STATUS1 0x7007
> +#define USBC_STATUS2 0x7008
> +#define USBC_STATUS3 0x7009
> +#define USBC_IRQ1 0x7015
> +#define USBC_IRQ2 0x7016
> +#define USBC_IRQMASK1 0x7017
> +#define USBC_IRQMASK2 0x7018
> +
> +/* Register bits */
> +
> +#define USBC_CONTROL1_MODE_DRP(r) (((r) & ~0x7) | 4)
> +
> +#define USBC_CONTROL2_UNATT_SNK BIT(0)
> +#define USBC_CONTROL2_UNATT_SRC BIT(1)
> +#define USBC_CONTROL2_DIS_ST BIT(2)
> +
> +#define USBC_CONTROL3_PD_DIS BIT(1)
> +
> +#define USBC_CC_CTRL_VCONN_EN BIT(1)
> +
> +#define USBC_STATUS1_DET_ONGOING BIT(6)
> +#define USBC_STATUS1_RSLT(r) ((r) & 0xf)
> +#define USBC_RSLT_NOTHING 0
> +#define USBC_RSLT_SRC_DEFAULT 1
> +#define USBC_RSLT_SRC_1_5A 2
> +#define USBC_RSLT_SRC_3_0A 3
> +#define USBC_RSLT_SNK 4
> +#define USBC_RSLT_DEBUG_ACC 5
> +#define USBC_RSLT_AUDIO_ACC 6
> +#define USBC_RSLT_UNDEF 15
> +#define USBC_STATUS1_ORIENT(r) (((r) >> 4) & 0x3)
> +#define USBC_ORIENT_NORMAL 1
> +#define USBC_ORIENT_REVERSE 2
> +
> +#define USBC_STATUS2_VBUS_REQ BIT(5)
> +
> +#define USBC_IRQ1_ADCDONE1 BIT(2)
> +#define USBC_IRQ1_OVERTEMP BIT(1)
> +#define USBC_IRQ1_SHORT BIT(0)
> +
> +#define USBC_IRQ2_CC_CHANGE BIT(7)
> +#define USBC_IRQ2_RX_PD BIT(6)
> +#define USBC_IRQ2_RX_HR BIT(5)
> +#define USBC_IRQ2_RX_CR BIT(4)
> +#define USBC_IRQ2_TX_SUCCESS BIT(3)
> +#define USBC_IRQ2_TX_FAIL BIT(2)
> +
> +#define USBC_IRQMASK1_ALL (USBC_IRQ1_ADCDONE1 | USBC_IRQ1_OVERTEMP | \
> + USBC_IRQ1_SHORT)
> +
> +#define USBC_IRQMASK2_ALL (USBC_IRQ2_CC_CHANGE | USBC_IRQ2_RX_PD | \
> + USBC_IRQ2_RX_HR | USBC_IRQ2_RX_CR | \
> + USBC_IRQ2_TX_SUCCESS | USBC_IRQ2_TX_FAIL)
> +
> +struct wcove_typec {
> + struct mutex lock; /* device lock */
> + struct device *dev;
> + struct regmap *regmap;
> + struct typec_port *port;
> + struct typec_capability cap;
> + struct typec_connection con;
> + struct typec_partner partner;
> +};
> +
> +enum wcove_typec_func {
> + WCOVE_FUNC_DRIVE_VBUS = 1,
> + WCOVE_FUNC_ORIENTATION,
> + WCOVE_FUNC_ROLE,
> + WCOVE_FUNC_DRIVE_VCONN,
> +};
> +
> +enum wcove_typec_orientation {
> + WCOVE_ORIENTATION_NORMAL,
> + WCOVE_ORIENTATION_REVERSE,
> +};
> +
> +enum wcove_typec_role {
> + WCOVE_ROLE_HOST,
> + WCOVE_ROLE_DEVICE,
> +};
> +
> +static uuid_le uuid = UUID_LE(0x482383f0, 0x2876, 0x4e49,
> + 0x86, 0x85, 0xdb, 0x66, 0x21, 0x1a, 0xf0, 0x37);
> +
> +static int wcove_typec_func(struct wcove_typec *wcove,
> + enum wcove_typec_func func, int param)
> +{
> + union acpi_object *obj;
> + union acpi_object tmp;
> + union acpi_object argv4 = ACPI_INIT_DSM_ARGV4(1, &tmp);
> +
> + tmp.type = ACPI_TYPE_INTEGER;
> + tmp.integer.value = param;
> +
> + obj = acpi_evaluate_dsm(ACPI_HANDLE(wcove->dev), uuid.b, 1, func,
> + &argv4);
> + if (!obj) {
> + dev_err(wcove->dev, "%s: failed to evaluate _DSM\n", __func__);
> + return -EIO;
> + }
> +
> + ACPI_FREE(obj);
> + return 0;
> +}
> +
> +static void wcove_typec_device_mode(struct wcove_typec *wcove)
> +{
> + wcove->con.partner = &wcove->partner;
> + wcove->con.pwr_role = TYPEC_SINK;
> + wcove->con.vconn_role = TYPEC_SINK;
> + wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_DEVICE);
> + typec_connect(wcove->port, &wcove->con);
> +}
> +
> +static irqreturn_t wcove_typec_irq(int irq, void *data)
> +{
> + struct wcove_typec *wcove = data;
> + unsigned int cc1_ctrl;
> + unsigned int cc2_ctrl;
> + unsigned int cc_irq1;
> + unsigned int cc_irq2;
> + unsigned int status1;
> + unsigned int status2;
> + int ret;
> +
> + mutex_lock(&wcove->lock);
> +
> + ret = regmap_read(wcove->regmap, USBC_IRQ1, &cc_irq1);
> + if (ret)
> + goto err;
> +
> + ret = regmap_read(wcove->regmap, USBC_IRQ2, &cc_irq2);
> + if (ret)
> + goto err;
> +
> + ret = regmap_read(wcove->regmap, USBC_STATUS1, &status1);
> + if (ret)
> + goto err;
> +
> + ret = regmap_read(wcove->regmap, USBC_STATUS2, &status2);
> + if (ret)
> + goto err;
> +
> + ret = regmap_read(wcove->regmap, USBC_CC1_CTRL, &cc1_ctrl);
> + if (ret)
> + goto err;
> +
> + ret = regmap_read(wcove->regmap, USBC_CC2_CTRL, &cc2_ctrl);
> + if (ret)
> + goto err;
> +
> + if (cc_irq1) {
> + if (cc_irq1 & USBC_IRQ1_OVERTEMP)
> + dev_err(wcove->dev, "VCONN Switch Over Temperature!\n");
> + if (cc_irq1 & USBC_IRQ1_SHORT)
> + dev_err(wcove->dev, "VCONN Switch Short Circuit!\n");
> + ret = regmap_write(wcove->regmap, USBC_IRQ1, cc_irq1);
> + if (ret)
> + goto err;
> + }
> +
> + if (cc_irq2) {
> + ret = regmap_write(wcove->regmap, USBC_IRQ2, cc_irq2);
> + if (ret)
> + goto err;
> + /*
> + * Ingoring any PD communication interrupts until the PD stack
> + * is in place
> + */
> + if (cc_irq2 & ~USBC_IRQ2_CC_CHANGE) {
> + dev_WARN(wcove->dev, "USB PD handling missing\n");
sure you want this as dev_WARN ?
> + goto err;
> + }
> + }
> +
> + if (status1 & USBC_STATUS1_DET_ONGOING)
> + goto out;
> +
> + if (USBC_STATUS1_RSLT(status1) == USBC_RSLT_NOTHING) {
> + if (wcove->con.partner) {
> + typec_disconnect(wcove->port);
> + memset(&wcove->con, 0, sizeof(wcove->con));
> + memset(&wcove->partner, 0, sizeof(wcove->partner));
> + }
> +
> + wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
> + WCOVE_ORIENTATION_NORMAL);
> + /* Host mode by default */
> + wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST);
> + goto out;
> + }
> +
> + if (wcove->con.partner)
> + goto out;
> +
> + switch (USBC_STATUS1_ORIENT(status1)) {
> + case USBC_ORIENT_NORMAL:
> + wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
> + WCOVE_ORIENTATION_NORMAL);
> + break;
> + case USBC_ORIENT_REVERSE:
> + wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
> + WCOVE_ORIENTATION_REVERSE);
> + default:
> + break;
> + }
> +
> + switch (USBC_STATUS1_RSLT(status1)) {
> + case USBC_RSLT_SRC_DEFAULT:
> + wcove->con.pwr_opmode = TYPEC_PWR_MODE_USB;
> + wcove_typec_device_mode(wcove);
> + break;
> + case USBC_RSLT_SRC_1_5A:
> + wcove->con.pwr_opmode = TYPEC_PWR_MODE_1_5A;
> + wcove_typec_device_mode(wcove);
> + break;
> + case USBC_RSLT_SRC_3_0A:
> + wcove->con.pwr_opmode = TYPEC_PWR_MODE_3_0A;
> + wcove_typec_device_mode(wcove);
> + break;
> + case USBC_RSLT_SNK:
> + wcove->con.partner = &wcove->partner;
> + wcove->con.data_role = TYPEC_HOST;
> + wcove->con.pwr_role = TYPEC_SOURCE;
> + wcove->con.vconn_role = TYPEC_SOURCE;
> + wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST);
> + typec_connect(wcove->port, &wcove->con);
> + break;
> + case USBC_RSLT_DEBUG_ACC:
> + wcove->partner.accessory = TYPEC_ACCESSORY_DEBUG;
> + wcove->con.partner = &wcove->partner;
> + typec_connect(wcove->port, &wcove->con);
> + break;
> + case USBC_RSLT_AUDIO_ACC:
> + wcove->partner.accessory = TYPEC_ACCESSORY_AUDIO;
> + wcove->con.partner = &wcove->partner;
> + typec_connect(wcove->port, &wcove->con);
> + break;
> + default:
> + dev_WARN(wcove->dev, "%s Undefined result\n", __func__);
> + goto err;
> + }
> +out:
> + /* If either CC pins is requesting VCONN, we turn it on */
> + if ((cc1_ctrl & USBC_CC_CTRL_VCONN_EN) ||
> + (cc2_ctrl & USBC_CC_CTRL_VCONN_EN))
> + wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, true);
> + else
> + wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, false);
> +
> + /* Relying on the FSM to know when we need to drive VBUS. */
> + wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VBUS,
> + !!(status2 & USBC_STATUS2_VBUS_REQ));
> +err:
> + /* REVISIT: Clear WhiskeyCove CHGR Type-C interrupt */
> + regmap_write(wcove->regmap, WCOVE_CHGRIRQ0, BIT(5));
> +
> + mutex_unlock(&wcove->lock);
> + return IRQ_HANDLED;
> +}
> +
> +static int wcove_typec_probe(struct platform_device *pdev)
> +{
> + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
> + struct wcove_typec *wcove;
> + unsigned int val;
> + int ret;
> +
> + wcove = devm_kzalloc(&pdev->dev, sizeof(*wcove), GFP_KERNEL);
> + if (!wcove)
> + return -ENOMEM;
> +
> + mutex_init(&wcove->lock);
> + wcove->dev = &pdev->dev;
> + wcove->regmap = pmic->regmap;
> +
> + ret = regmap_irq_get_virq(pmic->irq_chip_data_level2,
> + platform_get_irq(pdev, 0));
> + if (ret < 0)
> + return ret;
> +
> + ret = devm_request_threaded_irq(&pdev->dev, ret, NULL,
> + wcove_typec_irq, IRQF_ONESHOT,
> + "wcove_typec", wcove);
> + if (ret)
> + return ret;
> +
> + if (!acpi_check_dsm(ACPI_HANDLE(&pdev->dev), uuid.b, 0, 0x1f)) {
> + dev_err(&pdev->dev, "Missing _DSM functions\n");
> + return -ENODEV;
> + }
> +
> + wcove->cap.type = TYPEC_PORT_DRP;
> +
> + wcove->port = typec_register_port(&pdev->dev, &wcove->cap);
> + if (IS_ERR(wcove->port))
> + return PTR_ERR(wcove->port);
> +
> + /* Make sure the PD PHY is disabled until PD stack is ready */
> + regmap_read(wcove->regmap, USBC_CONTROL3, &val);
> + regmap_write(wcove->regmap, USBC_CONTROL3, val | USBC_CONTROL3_PD_DIS);
> +
Should this be done before registering the port ?
> + /* DRP mode without accessory support */
> + regmap_read(wcove->regmap, USBC_CONTROL1, &val);
> + regmap_write(wcove->regmap, USBC_CONTROL1, USBC_CONTROL1_MODE_DRP(val));
> +
> + /* Unmask everything */
> + regmap_read(wcove->regmap, USBC_IRQMASK1, &val);
> + regmap_write(wcove->regmap, USBC_IRQMASK1, val & ~USBC_IRQMASK1_ALL);
> + regmap_read(wcove->regmap, USBC_IRQMASK2, &val);
> + regmap_write(wcove->regmap, USBC_IRQMASK2, val & ~USBC_IRQMASK2_ALL);
> +
> + platform_set_drvdata(pdev, wcove);
> + return 0;
> +}
> +
> +static int wcove_typec_remove(struct platform_device *pdev)
> +{
> + struct wcove_typec *wcove = platform_get_drvdata(pdev);
> + unsigned int val;
> +
> + /* Mask everything */
> + regmap_read(wcove->regmap, USBC_IRQMASK1, &val);
> + regmap_write(wcove->regmap, USBC_IRQMASK1, val | USBC_IRQMASK1_ALL);
> + regmap_read(wcove->regmap, USBC_IRQMASK2, &val);
> + regmap_write(wcove->regmap, USBC_IRQMASK2, val | USBC_IRQMASK2_ALL);
> +
> + typec_unregister_port(wcove->port);
> + return 0;
> +}
> +
> +static struct platform_driver wcove_typec_driver = {
> + .driver = {
> + .name = "bxt_wcove_usbc",
> + },
> + .probe = wcove_typec_probe,
> + .remove = wcove_typec_remove,
> +};
> +
> +module_platform_driver(wcove_typec_driver);
> +
> +MODULE_AUTHOR("Intel Corporation");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("WhiskeyCove PMIC USB Type-C PHY driver");
> +MODULE_ALIAS("platform:bxt_wcove_usbc");
> --
> 2.10.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
