According to the Devicetree ePAPR [1] the datatypes u8 and u16 are not defined. So using device_property_read_u16() would result in a partial read of a 32-bit big-endian integer which is not intended. So we better read the complete 32-bit value. This fixes a regression on bcm2835 where the values for g-rx-fifo-size and g-np-tx-fifo-size always read as zero: Invalid value 0 for param g-rx-fifo-size Invalid value 0 for param g-np-tx-fifo-size [1] - http://elinux.org/images/c/cf/Power_ePAPR_APPROVED_v1.1.pdf Fixes: 05ee799f202 ("usb: dwc2: Move gadget settings into core_params") Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> --- drivers/usb/dwc2/params.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index fd5f7f8..2c7b624 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -247,8 +247,6 @@ static void dwc2_get_device_property(struct dwc2_hsotg *hsotg, char *property, u8 size, u64 *value) { - u8 val8; - u16 val16; u32 val32; switch (size) { @@ -256,17 +254,7 @@ static void dwc2_get_device_property(struct dwc2_hsotg *hsotg, *value = device_property_read_bool(hsotg->dev, property); break; case 1: - if (device_property_read_u8(hsotg->dev, property, &val8)) - return; - - *value = val8; - break; case 2: - if (device_property_read_u16(hsotg->dev, property, &val16)) - return; - - *value = val16; - break; case 4: if (device_property_read_u32(hsotg->dev, property, &val32)) return; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
