On Tue, Nov 15, 2016 at 06:42:45PM +0100, Alexandre Bailon wrote: > This series require the following patch to build: > [PATCH 1/6] usb: musb: Fix broken use of static variable for multiple instances > > Currently, the USB OTG of the da8xx doesn't work. > This series intend to fix them. > > Change in v2: > * Fix the error path da8xx_musb_init() > > Changes in v3: > * Remove the host workaround that was not working on every platform > * Add a property to the devicetree node of phy to force the phy in a specific > mode (host or device). > * Only use dr_mode to configure the controller mode and let the phy in OTG mode. > The main goal of this change is to prevent the phy to be set in host or > device mode because these modes have some issues. > > Changes in v4: > * Enable VBUS sense and session end comparator during probe of phy. > * Add a quirk flag to skip the phy set mode made during the init of musb. > In that way, we can still can configure the phy mode by using mode file in > sysfs and configure the controller mode by using dr_mode or platform_data. > * Init the phy in otg mode in da8xx glue driver. > > Changes in v5: > * Add the init argument to musb_platform_set_mode() and set_mode() callback. > * Remove the quirk > * Configure the DA8xx phy in OTG mode if da8xx_musb_set_mode() is called from > init. > > Changes in v6: > * Remove the patch that was adding a new parametter to musb_platform_set_mode(). > Instead, use the variable is_initialized. > * The patch fixing the phy has been merged to phy-next, so I removed it from > this series. > > Alexandre Bailon (2): > usb: musb: da8xx: Call earlier clk_prepare_enable() > usb: musb: da8xx: Set phy in OTG mode by default Applied. Thanks. -Bin. > > drivers/usb/musb/da8xx.c | 24 +++++++++++++++--------- > 1 file changed, 15 insertions(+), 9 deletions(-) > > -- > 2.7.3 > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
