The DA8xx OTG PHY has some issues when it is forced in host or
peripheral mode. Actually, most of the time, OTG is the best mode
because host or peripheral mode are only required for hardware that
miss some circuitry.
Init the PHY mode OTG mode by default.
Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
---
drivers/usb/musb/da8xx.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 4fc226c..e0dbe14 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -340,6 +340,13 @@ static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent);
enum phy_mode phy_mode;
+ /*
+ * The PHY has some issues when it is forced in device or host mode.
+ * Unless the user request another mode, configure the PHY in OTG mode.
+ */
+ if (!musb->is_initialized)
+ return phy_set_mode(glue->phy, PHY_MODE_USB_OTG);
+
switch (musb_mode) {
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
phy_mode = PHY_MODE_USB_HOST;
--
2.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
