Re: [PATCH v5] phy: rcar-gen3-usb2: add sysfs for usb role swap

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wednesday 09 November 2016 08:00 AM, Yoshihiro Shimoda wrote:
> This patch adds sysfs "role" for usb role swap. This parameter can be
> read and write. If you use this file as the following, you can swap
> the usb role.
> 
> For example:
>  1) Connect a usb cable using 2 Salvator-x boards
>  2) On A-Device (ID pin is low), you input the following command:
>    # echo peripheral > /sys/devices/platform/soc/ee080200.usb-phy/role
>  3) On B-Device (ID pin is high), you input the following command:
>    # echo host > /sys/devices/platform/soc/ee080200.usb-phy/role
> 
> Then, the A-device acts as a peripheral and the B-device acts as a host.
> Please note that A-Device must input the following command if you
> want the board to act as a host again. (even if you disconnect the usb
> cable, since id state may be the same, the A-Device keeps to act as
> peripheral.)
>  # echo host > /sys/devices/platform/soc/ee080200.usb-phy/role
> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> Reviewed-by: Peter Chen <peter.chen@xxxxxxx>

merged to phy -next.

Thanks
Kishon
> ---
>  This patch is based on the latest linux-phy.git / next branch.
>  (commit id = 7809cd2ce6abd4f431e4b14e6b1276a7cc842ac4)
> 
>  Since this patch is related to usb, I added email addresses of Greg, Felipe,
>  Peter and USB ML as CC. (This patch doesn't use USB OTG FSM though.)
> 
>  Changes from v4:
>   - Use if-else about the is_b_device check in role_store().
>   - Add "Reviewed-by: Peter Chen <peter.chen@xxxxxxx>"
> 
>  Changes from v3:
>   - Clean up redundant conditions in role_store().
> 
>  Changes from v2:
>   - Modify the sysfs file name to "role", and the argument is "host" or
>     "peripheral". Peter suggested this. Thank you!
> 
>  Changes from v1:
>   - rebase the latest next branch.
> 
>  .../ABI/testing/sysfs-platform-phy-rcar-gen3-usb2  |  15 +++
>  drivers/phy/phy-rcar-gen3-usb2.c                   | 118 ++++++++++++++++++++-
>  2 files changed, 132 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
> 
> diff --git a/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2 b/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
> new file mode 100644
> index 0000000..6212697
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-platform-phy-rcar-gen3-usb2
> @@ -0,0 +1,15 @@
> +What:		/sys/devices/platform/<phy-name>/role
> +Date:		October 2016
> +KernelVersion:	4.10
> +Contact:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> +Description:
> +		This file can be read and write.
> +		The file can show/change the phy mode for role swap of usb.
> +
> +		Write the following strings to change the mode:
> +		 "host" - switching mode from peripheral to host.
> +		 "peripheral" - switching mode from host to peripheral.
> +
> +		Read the file, then it shows the following strings:
> +		 "host" - The mode is host now.
> +		 "peripheral" - The mode is peripheral now.
> diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
> index 3d97ead..c63da1b 100644
> --- a/drivers/phy/phy-rcar-gen3-usb2.c
> +++ b/drivers/phy/phy-rcar-gen3-usb2.c
> @@ -70,6 +70,7 @@
>  #define USB2_LINECTRL1_DP_RPD		BIT(18)
>  #define USB2_LINECTRL1_DMRPD_EN		BIT(17)
>  #define USB2_LINECTRL1_DM_RPD		BIT(16)
> +#define USB2_LINECTRL1_OPMODE_NODRV	BIT(6)
>  
>  /* ADPCTRL */
>  #define USB2_ADPCTRL_OTGSESSVLD		BIT(20)
> @@ -161,6 +162,43 @@ static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
>  	schedule_work(&ch->work);
>  }
>  
> +static void rcar_gen3_init_for_b_host(struct rcar_gen3_chan *ch)
> +{
> +	void __iomem *usb2_base = ch->base;
> +	u32 val;
> +
> +	val = readl(usb2_base + USB2_LINECTRL1);
> +	writel(val | USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
> +
> +	rcar_gen3_set_linectrl(ch, 1, 1);
> +	rcar_gen3_set_host_mode(ch, 1);
> +	rcar_gen3_enable_vbus_ctrl(ch, 0);
> +
> +	val = readl(usb2_base + USB2_LINECTRL1);
> +	writel(val & ~USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
> +}
> +
> +static void rcar_gen3_init_for_a_peri(struct rcar_gen3_chan *ch)
> +{
> +	rcar_gen3_set_linectrl(ch, 0, 1);
> +	rcar_gen3_set_host_mode(ch, 0);
> +	rcar_gen3_enable_vbus_ctrl(ch, 1);
> +}
> +
> +static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch)
> +{
> +	void __iomem *usb2_base = ch->base;
> +	u32 val;
> +
> +	val = readl(usb2_base + USB2_OBINTEN);
> +	writel(val & ~USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
> +
> +	rcar_gen3_enable_vbus_ctrl(ch, 0);
> +	rcar_gen3_init_for_host(ch);
> +
> +	writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
> +}
> +
>  static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
>  {
>  	return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
> @@ -174,6 +212,65 @@ static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
>  		rcar_gen3_init_for_peri(ch);
>  }
>  
> +static bool rcar_gen3_is_host(struct rcar_gen3_chan *ch)
> +{
> +	return !(readl(ch->base + USB2_COMMCTRL) & USB2_COMMCTRL_OTG_PERI);
> +}
> +
> +static ssize_t role_store(struct device *dev, struct device_attribute *attr,
> +			  const char *buf, size_t count)
> +{
> +	struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
> +	bool is_b_device, is_host, new_mode_is_host;
> +
> +	if (!ch->has_otg || !ch->phy->init_count)
> +		return -EIO;
> +
> +	/*
> +	 * is_b_device: true is B-Device. false is A-Device.
> +	 * If {new_mode_}is_host: true is Host mode. false is Peripheral mode.
> +	 */
> +	is_b_device = rcar_gen3_check_id(ch);
> +	is_host = rcar_gen3_is_host(ch);
> +	if (!strncmp(buf, "host", strlen("host")))
> +		new_mode_is_host = true;
> +	else if (!strncmp(buf, "peripheral", strlen("peripheral")))
> +		new_mode_is_host = false;
> +	else
> +		return -EINVAL;
> +
> +	/* If current and new mode is the same, this returns the error */
> +	if (is_host == new_mode_is_host)
> +		return -EINVAL;
> +
> +	if (new_mode_is_host) {		/* And is_host must be false */
> +		if (!is_b_device)	/* A-Peripheral */
> +			rcar_gen3_init_from_a_peri_to_a_host(ch);
> +		else			/* B-Peripheral */
> +			rcar_gen3_init_for_b_host(ch);
> +	} else {			/* And is_host must be true */
> +		if (!is_b_device)	/* A-Host */
> +			rcar_gen3_init_for_a_peri(ch);
> +		else			/* B-Host */
> +			rcar_gen3_init_for_peri(ch);
> +	}
> +
> +	return count;
> +}
> +
> +static ssize_t role_show(struct device *dev, struct device_attribute *attr,
> +			 char *buf)
> +{
> +	struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
> +
> +	if (!ch->has_otg || !ch->phy->init_count)
> +		return -EIO;
> +
> +	return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
> +							    "peripheral");
> +}
> +static DEVICE_ATTR_RW(role);
> +
>  static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
>  {
>  	void __iomem *usb2_base = ch->base;
> @@ -351,21 +448,40 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
>  		channel->vbus = NULL;
>  	}
>  
> +	platform_set_drvdata(pdev, channel);
>  	phy_set_drvdata(channel->phy, channel);
>  
>  	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> -	if (IS_ERR(provider))
> +	if (IS_ERR(provider)) {
>  		dev_err(dev, "Failed to register PHY provider\n");
> +	} else if (channel->has_otg) {
> +		int ret;
> +
> +		ret = device_create_file(dev, &dev_attr_role);
> +		if (ret < 0)
> +			return ret;
> +	}
>  
>  	return PTR_ERR_OR_ZERO(provider);
>  }
>  
> +static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
> +{
> +	struct rcar_gen3_chan *channel = platform_get_drvdata(pdev);
> +
> +	if (channel->has_otg)
> +		device_remove_file(&pdev->dev, &dev_attr_role);
> +
> +	return 0;
> +};
> +
>  static struct platform_driver rcar_gen3_phy_usb2_driver = {
>  	.driver = {
>  		.name		= "phy_rcar_gen3_usb2",
>  		.of_match_table	= rcar_gen3_phy_usb2_match_table,
>  	},
>  	.probe	= rcar_gen3_phy_usb2_probe,
> +	.remove = rcar_gen3_phy_usb2_remove,
>  };
>  module_platform_driver(rcar_gen3_phy_usb2_driver);
>  
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux