On Tue, Oct 18, 2016 at 01:51:39PM -0700, Stephen Boyd wrote: > Quoting Peter Chen (2016-10-18 02:31:40) > > On Mon, Oct 17, 2016 at 06:56:13PM -0700, Stephen Boyd wrote: > > > I've also sent separate patches for other minor pieces to make this > > > all work. The full tree can be found here[2], hacks and all to get > > > things working. I've tested this on the db410c, apq8074 dragonboard, > > > and ifc6410 with configfs gadgets and otg cables. > > > > > > Patches based on v4.8-rc1 > > Oops should be v4.9-rc1 here. > > > > > > > Changes from v4: > > > * Picked up Acks from Rob > > > * Updated HS phy init sequence DT property to restrict it to offsets > > > > I remembered that you got all my acks for chipidea patches, right? I did > > not check for this series. > > Sorry I've added in one more patch > > usb: chipidea: Emulate OTGSC interrupt enable path > > to fix extcon interrupt emulation even further. > > > > > Besides, the patch "gpu: Remove depends on RESET_CONTROLLER when not a > > provider" [1] still not be accepted, I need this patch to be merged > > first, then apply your chipidea part, otherwise, there is a building > > warning. > > > > [1] https://patchwork.kernel.org/patch/9322583/ > > Yes, I'm going to resend that patch now. I hope that David will apply it > for -rc2. Stephen, just a mind. I have rebased Greg's usb-next tree (v4.9-rc3 on it), your GPU fix is still not there. -- Best Regards, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
