The register programming code in dwc2_updated_ram_clk_sel() will never
be executed. And in fact the entire function can be removed as there is
no way to override the default value of GCTL.RAMCLKSEL. Remove the
function and add a comment explaining where GCTL.RAMCLKSEL should be
programmed if needed in the future.
This fixes dead code warnings in coverity.
Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx>
---
drivers/usb/dwc3/gadget.c | 35 ++++++++---------------------------
1 file changed, 8 insertions(+), 27 deletions(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 22ccc34..230ffa3 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2468,32 +2468,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
}
-static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
-{
- u32 reg;
- u32 usb30_clock = DWC3_GCTL_CLK_BUS;
-
- /*
- * We change the clock only at SS but I dunno why I would want to do
- * this. Maybe it becomes part of the power saving plan.
- */
-
- if ((speed != DWC3_DSTS_SUPERSPEED) &&
- (speed != DWC3_DSTS_SUPERSPEED_PLUS))
- return;
-
- /*
- * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed
- * each time on Connect Done.
- */
- if (!usb30_clock)
- return;
-
- reg = dwc3_readl(dwc->regs, DWC3_GCTL);
- reg |= DWC3_GCTL_RAMCLKSEL(usb30_clock);
- dwc3_writel(dwc->regs, DWC3_GCTL, reg);
-}
-
static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
{
struct dwc3_ep *dep;
@@ -2505,7 +2479,14 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
speed = reg & DWC3_DSTS_CONNECTSPD;
dwc->speed = speed;
- dwc3_update_ram_clk_sel(dwc, speed);
+ /*
+ * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed
+ * each time on Connect Done.
+ *
+ * Currently we always use the reset value. If any platform
+ * wants to set this to a different value, we need to add a
+ * setting and update GCTL.RAMCLKSEL here.
+ */
switch (speed) {
case DWC3_DSTS_SUPERSPEED_PLUS:
--
2.10.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
