Add a function to check properties and call it from probe. This will allow us to add check code without bloating the probe function. This needs to be done after dwc3_get_properties() and dwc3_core_init() so that all the properties and hardware configs are available. Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx> --- drivers/usb/dwc3/core.c | 59 +++++++++++++++++++++++++++---------------------- 1 file changed, 33 insertions(+), 26 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 037052d..af42346 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1019,6 +1019,38 @@ static void dwc3_get_properties(struct dwc3 *dwc) } +static void dwc3_check_params(struct dwc3 *dwc) +{ + struct device *dev = dwc->dev; + + /* Check the maximum_speed parameter */ + switch (dwc->maximum_speed) { + case USB_SPEED_LOW: + case USB_SPEED_FULL: + case USB_SPEED_HIGH: + case USB_SPEED_SUPER: + case USB_SPEED_SUPER_PLUS: + break; + default: + dev_err(dev, "invalid maximum_speed parameter %d\n", + dwc->maximum_speed); + /* fall through */ + case USB_SPEED_UNKNOWN: + /* default to superspeed */ + dwc->maximum_speed = USB_SPEED_SUPER; + + /* + * default to superspeed plus if we are capable. + */ + if (dwc3_is_usb31(dwc) && + (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == + DWC3_GHWPARAMS3_SSPHY_IFC_GEN2)) + dwc->maximum_speed = USB_SPEED_SUPER_PLUS; + + break; + } +} + static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1110,32 +1142,7 @@ static int dwc3_probe(struct platform_device *pdev) goto err4; } - /* Check the maximum_speed parameter */ - switch (dwc->maximum_speed) { - case USB_SPEED_LOW: - case USB_SPEED_FULL: - case USB_SPEED_HIGH: - case USB_SPEED_SUPER: - case USB_SPEED_SUPER_PLUS: - break; - default: - dev_err(dev, "invalid maximum_speed parameter %d\n", - dwc->maximum_speed); - /* fall through */ - case USB_SPEED_UNKNOWN: - /* default to superspeed */ - dwc->maximum_speed = USB_SPEED_SUPER; - - /* - * default to superspeed plus if we are capable. - */ - if (dwc3_is_usb31(dwc) && - (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == - DWC3_GHWPARAMS3_SSPHY_IFC_GEN2)) - dwc->maximum_speed = USB_SPEED_SUPER_PLUS; - - break; - } + dwc3_check_params(dwc); ret = dwc3_core_init_mode(dwc); if (ret) -- 2.10.0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html