Hi Tony,
On Thursday 10 Nov 2016 08:01:52 Tony Lindgren wrote:
> * Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> [161110 05:46]:
> > On Monday 07 Nov 2016 14:50:16 Tony Lindgren wrote:
> > > Hi all,
> > >
> > > Here are musb fixes for the issues that I've been able to track down.
> > > Not sure if these will help with the problem Ladis was seeing as I'm
> > > not able to reproduce that one it seems.
> > >
> > > As many people depend on this driver I'd like to have these merged
> > > for v4.9-rc cycle after review and testing.
> > >
> > > Please review and test. You need to use v4.9-rc3 or later for testing
> > > because of the earlier fixes.
> >
> > The series fixes my problems, both with the original and latest version of
> > patch 2/4.
> >
> > Tested-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>
> OK good to hear and thanks for testing.
>
> > I have however seen the following warning once with the original version
> > of 2/4.
> >
> > [ 3.094116] usb 1-1: New USB device found, idVendor=0424,
> > idProduct=9514
> > [ 3.101257] usb 1-1: New USB device strings: Mfr=0, Product=0,
> > SerialNumber=0 [ 3.110626] ------------[ cut here ]------------
> > [ 3.110717] WARNING: CPU: 0 PID: 4 at
> > /home/laurent/src/kernel/omap4/linux-2.6/drivers/bus/omap_l3_noc.c:147
> > l3_interrupt_handler+0x220/0x348 [ 3.110717] 44000000.ocp:L3 Custom
> > Error: MASTER MPU TARGET L4CFG (Read): Data Access in User mode during
> > Functional access
> I've seen similar with interconnect target was not ready in time
> on ti81xx when booting that got fixed with commit ebf244148092
> ("ARM: OMAP2+: Use srst_udelay for USB on dm814x"). It is possible
> that omap4 needs similar fix but hard to say unless we have it
> reproducable. Anyways, below is an untested patch for omap4 to play
> with. Maybe repeated reboot or modprobe test would make it
> reproducable?
I'll try to give it a go, but right now I'm stuck with a different MUSB
problem :-) I'm trying to boot my panda board over the SMSC95xx ethernet, and
have switched gadget support from being compiled in to being compiled as a
module. I then get
[ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle while active
printed in a loop at boot time. I've traced musb->is_active being set to 1 in
musb_start() with
musb->port_mode = MUSB_PORT_MODE_DUAL_ROLE
musb->xceiv->otg->state = OTG_STATE_A_IDLE
devctl = MUSB_DEVCTL_BDEVICE | MUSB_DEVCTL_VBUS
I can disable gadget support completely which will I believe fix the problem,
but that's just a workaround. Help would be appreciated.
> 8< ------------------------------
> diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c ---
> a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> @@ -2982,6 +2982,7 @@ static struct omap_hwmod_class_sysconfig
> omap44xx_usb_otg_hs_sysc = { .rev_offs = 0x0400,
> .sysc_offs = 0x0404,
> .syss_offs = 0x0408,
> + .srst_udelay = 2,
> .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
> SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
> SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
