Re: [PATCH 01/30] usb: dwc2: Deprecate g-use-dma binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/8/2016 11:54 PM, Felipe Balbi wrote:
> 
> Hi,
> 
> John Youn <John.Youn@xxxxxxxxxxxx> writes:
>> On 11/8/2016 1:12 AM, Felipe Balbi wrote:
>>>
>>> Hi,
>>>
>>> John Youn <johnyoun@xxxxxxxxxxxx> writes:
>>>> Add a vendor prefix and make the name more consistent by renaming it to
>>>> "snps,gadget-dma-enable".
>>>>
>>>> Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx>
>>>> ---
>>>>  Documentation/devicetree/bindings/usb/dwc2.txt | 5 ++++-
>>>>  arch/arm/boot/dts/rk3036.dtsi                  | 2 +-
>>>>  arch/arm/boot/dts/rk3288.dtsi                  | 2 +-
>>>>  arch/arm/boot/dts/rk3xxx.dtsi                  | 2 +-
>>>>  arch/arm64/boot/dts/hisilicon/hi6220.dtsi      | 2 +-
>>>>  arch/arm64/boot/dts/rockchip/rk3368.dtsi       | 2 +-
>>>>  drivers/usb/dwc2/params.c                      | 9 ++++++++-
>>>>  drivers/usb/dwc2/pci.c                         | 2 +-
>>>>  8 files changed, 18 insertions(+), 8 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
>>>> index 9472111..389a461 100644
>>>> --- a/Documentation/devicetree/bindings/usb/dwc2.txt
>>>> +++ b/Documentation/devicetree/bindings/usb/dwc2.txt
>>>> @@ -26,11 +26,14 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
>>>>  - dr_mode: shall be one of "host", "peripheral" and "otg"
>>>>    Refer to usb/generic.txt
>>>>  - snps,host-dma-disable: disable host DMA mode.
>>>> -- g-use-dma: enable dma usage in gadget driver.
>>>> +- snps,gadget-dma-enable: enable gadget DMA mode.
>>>
>>> I don't see why you even have this binding. Looking through the code,
>>> you have:
>>>
>>> #define GHWCFG2_SLAVE_ONLY_ARCH			0
>>> #define GHWCFG2_EXT_DMA_ARCH			1
>>> #define GHWCFG2_INT_DMA_ARCH			2
>>>
>>> void dwc2_set_param_dma_enable(struct dwc2_hsotg *hsotg, int val)
>>> {
>>> 	int valid = 1;
>>>
>>> 	if (val > 0 && hsotg->hw_params.arch == GHWCFG2_SLAVE_ONLY_ARCH)
>>> 		valid = 0;
>>> 	if (val < 0)
>>> 		valid = 0;
>>>
>>> 	if (!valid) {
>>> 		if (val >= 0)
>>> 			dev_err(hsotg->dev,
>>> 				"%d invalid for dma_enable parameter. Check HW configuration.\n",
>>> 				val);
>>> 		val = hsotg->hw_params.arch != GHWCFG2_SLAVE_ONLY_ARCH;
>>> 		dev_dbg(hsotg->dev, "Setting dma_enable to %d\n", val);
>>> 	}
>>>
>>> 	hsotg->core_params->dma_enable = val;
>>> }
>>>
>>> which seems to hint that DMA support is discoverable. If there is DMA,
>>> why would disable it?
>>>
>>
>> Yes that's the case and I would prefer to make it discoverable and
>> enabled by default.
>>
>> But the legacy behavior has always been like this because DMA was
>> never fully implemented in the gadget driver and it was an opt-in
>> feature. Periodic support was only added recently.
> 
> legacy behavior can be changed if another 'policy' makes more
> sense. IMHO, whatever can be discovered in runtime, should be enabled by
> default. That way, we force people to use it and find bugs in certain
> features.

Sounds good to me. I'll make the changes.

Regards,
John
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux