This little helper will be used to setup anything
related to GCTL register. There are no functional
changes, this is a cleanup only patch.
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
---
drivers/usb/dwc3/core.c | 90 ++++++++++++++++++++++++++-----------------------
1 file changed, 48 insertions(+), 42 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 3e9515073e05..e65f30afb89a 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -615,49 +615,10 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc)
return true;
}
-/**
- * dwc3_core_init - Low-level initialization of DWC3 Core
- * @dwc: Pointer to our controller context structure
- *
- * Returns 0 on success otherwise negative errno.
- */
-static int dwc3_core_init(struct dwc3 *dwc)
+static void dwc3_core_setup_global_control(struct dwc3 *dwc)
{
- u32 hwparams4 = dwc->hwparams.hwparams4;
- u32 reg;
- int ret;
-
- if (!dwc3_core_is_valid(dwc)) {
- dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
- ret = -ENODEV;
- goto err0;
- }
-
- /*
- * Write Linux Version Code to our GUID register so it's easy to figure
- * out which kernel version a bug was found.
- */
- dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE);
-
- /* Handle USB2.0-only core configuration */
- if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
- DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
- if (dwc->maximum_speed == USB_SPEED_SUPER)
- dwc->maximum_speed = USB_SPEED_HIGH;
- }
-
- /* issue device SoftReset too */
- ret = dwc3_soft_reset(dwc);
- if (ret)
- goto err0;
-
- ret = dwc3_core_soft_reset(dwc);
- if (ret)
- goto err0;
-
- ret = dwc3_phy_setup(dwc);
- if (ret)
- goto err0;
+ u32 hwparams4 = dwc->hwparams.hwparams4;
+ u32 reg;
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
@@ -726,7 +687,52 @@ static int dwc3_core_init(struct dwc3 *dwc)
reg |= DWC3_GCTL_U2RSTECN;
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+}
+
+/**
+ * dwc3_core_init - Low-level initialization of DWC3 Core
+ * @dwc: Pointer to our controller context structure
+ *
+ * Returns 0 on success otherwise negative errno.
+ */
+static int dwc3_core_init(struct dwc3 *dwc)
+{
+ u32 reg;
+ int ret;
+
+ if (!dwc3_core_is_valid(dwc)) {
+ dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
+ ret = -ENODEV;
+ goto err0;
+ }
+
+ /*
+ * Write Linux Version Code to our GUID register so it's easy to figure
+ * out which kernel version a bug was found.
+ */
+ dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE);
+
+ /* Handle USB2.0-only core configuration */
+ if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
+ DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
+ if (dwc->maximum_speed == USB_SPEED_SUPER)
+ dwc->maximum_speed = USB_SPEED_HIGH;
+ }
+
+ /* issue device SoftReset too */
+ ret = dwc3_soft_reset(dwc);
+ if (ret)
+ goto err0;
+
+ ret = dwc3_core_soft_reset(dwc);
+ if (ret)
+ goto err0;
+
+ ret = dwc3_phy_setup(dwc);
+ if (ret)
+ goto err0;
+ dwc3_core_setup_global_control(dwc);
dwc3_core_num_eps(dwc);
ret = dwc3_setup_scratch_buffers(dwc);
--
2.10.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
