* Johan Hovold <johan@xxxxxxxxxx> [161027 09:45]:
> On Thu, Oct 27, 2016 at 08:14:46AM -0700, Tony Lindgren wrote:
> > * Tony Lindgren <tony@xxxxxxxxxxx> [161026 07:32]:
>
> > 8< -------------------------------
> > From tony Mon Sep 17 00:00:00 2001
> > From: Tony Lindgren <tony@xxxxxxxxxxx>
> > Date: Tue, 25 Oct 2016 08:42:00 -0700
> > Subject: [PATCH] usb: musb: Fix sleeping function called from invalid
> > context for hdrc glue
> >
> > Commit 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPS
> > glue layer") wrongly added a call for pm_runtime_get_sync to otg_timer
> > that runs in softirq context. That causes a "BUG: sleeping function called
> > from invalid context" every time when polling the cable status:
> >
> > [<c015ebb4>] (__might_sleep) from [<c0413d60>] (__pm_runtime_resume+0x9c/0xa0)
> > [<c0413d60>] (__pm_runtime_resume) from [<c04d0bc4>] (otg_timer+0x3c/0x254)
> > [<c04d0bc4>] (otg_timer) from [<c0191180>] (call_timer_fn+0xfc/0x41c)
> > [<c0191180>] (call_timer_fn) from [<c01915c0>] (expire_timers+0x120/0x210)
> > [<c01915c0>] (expire_timers) from [<c0191acc>] (run_timer_softirq+0xa4/0xdc)
> > [<c0191acc>] (run_timer_softirq) from [<c010168c>] (__do_softirq+0x12c/0x594)
> >
> > I did not notice that as I did not have CONFIG_DEBUG_ATOMIC_SLEEP enabled.
> >
> > Let's fix the issue by adding dsps_check_status() and then register a
> > callback with musb_runtime_resume() so it gets called only when musb core
> > and it's parent devices are awake. Note that we don't want to do this from
> > PM runtime resume in musb_dsps.c as musb core is not awake yet at that
> > point as noted by Johan Hovold <johan@xxxxxxxxxx>.
>
> It seems some chunks are missing since this patch only runs the
> deferred work at remove and not at runtime resume, effectively breaking
> detection.
Oops sorry yeah looks like I had that in a separate debug hacks patch..
> > Note that musb_gadget_queue() also suffers from a similar issue when
> > connecting the cable and cannot use pm_runtime_get_sync().
>
> You seem to have left that pm_runtime_get_sync() in there though.
And that one I must have hosed when cleaning up, thanks for noticing
these. Updated patch below.
Regards,
Tony
8< ---------------------
>From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@xxxxxxxxxxx>
Date: Tue, 25 Oct 2016 08:42:00 -0700
Subject: [PATCH] usb: musb: Fix sleeping function called from invalid
context for hdrc glue
Commit 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPS
glue layer") wrongly added a call for pm_runtime_get_sync to otg_timer
that runs in softirq context. That causes a "BUG: sleeping function called
from invalid context" every time when polling the cable status:
[<c015ebb4>] (__might_sleep) from [<c0413d60>] (__pm_runtime_resume+0x9c/0xa0)
[<c0413d60>] (__pm_runtime_resume) from [<c04d0bc4>] (otg_timer+0x3c/0x254)
[<c04d0bc4>] (otg_timer) from [<c0191180>] (call_timer_fn+0xfc/0x41c)
[<c0191180>] (call_timer_fn) from [<c01915c0>] (expire_timers+0x120/0x210)
[<c01915c0>] (expire_timers) from [<c0191acc>] (run_timer_softirq+0xa4/0xdc)
[<c0191acc>] (run_timer_softirq) from [<c010168c>] (__do_softirq+0x12c/0x594)
I did not notice that as I did not have CONFIG_DEBUG_ATOMIC_SLEEP enabled.
Let's fix the issue by adding dsps_check_status() and then register a
callback with musb_runtime_resume() so it gets called only when musb core
and it's parent devices are awake. Note that we don't want to do this from
PM runtime resume in musb_dsps.c as musb core is not awake yet at that
point as noted by Johan Hovold <johan@xxxxxxxxxx>.
Note that musb_gadget_queue() also suffers from a similar issue when
connecting the cable and cannot use pm_runtime_get_sync().
Fixes: 65b3f50ed6fa ("usb: musb: Add PM runtime support for MUSB DSPS
glue layer")
Reported-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
drivers/usb/musb/musb_core.c | 48 ++++++++++++++++++++++++++++++++++++++++--
drivers/usb/musb/musb_core.h | 7 ++++++
drivers/usb/musb/musb_dsps.c | 29 +++++++++++++++++++------
drivers/usb/musb/musb_gadget.c | 18 +++++++++++++---
4 files changed, 90 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -122,7 +122,6 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
-
/*-------------------------------------------------------------------------*/
static inline struct musb *dev_to_musb(struct device *dev)
@@ -1896,6 +1895,46 @@ static void musb_pm_runtime_check_session(struct musb *musb)
musb->session = s;
}
+struct musb_resume_work {
+ void (*callback)(struct musb *musb, void *data);
+ void *data;
+ struct list_head node;
+};
+
+void musb_queue_on_resume(struct musb *musb,
+ void (*callback)(struct musb *musb, void *data),
+ void *data)
+{
+ struct musb_resume_work *w;
+ unsigned long flags;
+
+ w = devm_kzalloc(musb->controller, sizeof(*w), GFP_ATOMIC);
+ if (!w)
+ return;
+
+ w->callback = callback;
+ w->data = data;
+ spin_lock_irqsave(&musb->list_lock, flags);
+ list_add_tail(&w->node, &musb->resume_work);
+ spin_unlock_irqrestore(&musb->list_lock, flags);
+}
+EXPORT_SYMBOL_GPL(musb_queue_on_resume);
+
+static void musb_run_pending(struct musb *musb)
+{
+ struct musb_resume_work *w, *_w;
+ unsigned long flags;
+
+ spin_lock_irqsave(&musb->list_lock, flags);
+ list_for_each_entry_safe(w, _w, &musb->resume_work, node) {
+ if (w->callback)
+ w->callback(musb, w->data);
+ list_del(&w->node);
+ devm_kfree(musb->controller, w);
+ }
+ spin_unlock_irqrestore(&musb->list_lock, flags);
+}
+
/* Only used to provide driver mode change events */
static void musb_irq_work(struct work_struct *data)
{
@@ -1969,6 +2008,7 @@ static struct musb *allocate_instance(struct device *dev,
INIT_LIST_HEAD(&musb->control);
INIT_LIST_HEAD(&musb->in_bulk);
INIT_LIST_HEAD(&musb->out_bulk);
+ INIT_LIST_HEAD(&musb->resume_work);
musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
@@ -2065,6 +2105,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
}
spin_lock_init(&musb->lock);
+ spin_lock_init(&musb->list_lock);
musb->board_set_power = plat->set_power;
musb->min_power = plat->min_power;
musb->ops = plat->platform_ops;
@@ -2374,6 +2415,7 @@ static int musb_remove(struct platform_device *pdev)
* - Peripheral mode: peripheral is deactivated (or never-activated)
* - OTG mode: both roles are deactivated (or never-activated)
*/
+ musb_run_pending(musb);
musb_exit_debugfs(musb);
cancel_work_sync(&musb->irq_work);
@@ -2645,8 +2687,10 @@ static int musb_runtime_resume(struct device *dev)
* Also context restore without save does not make
* any sense
*/
- if (!first)
+ if (!first) {
musb_restore_context(musb);
+ musb_run_pending(musb);
+ }
first = 0;
if (musb->need_finish_resume) {
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -303,6 +303,7 @@ struct musb_context_registers {
struct musb {
/* device lock */
spinlock_t lock;
+ spinlock_t list_lock; /* resume work list lock */
struct musb_io io;
const struct musb_platform_ops *ops;
@@ -337,6 +338,7 @@ struct musb {
struct list_head control; /* of musb_qh */
struct list_head in_bulk; /* of musb_qh */
struct list_head out_bulk; /* of musb_qh */
+ struct list_head resume_work; /* pending work on resume */
struct timer_list otg_timer;
struct notifier_block nb;
@@ -540,6 +542,11 @@ extern irqreturn_t musb_interrupt(struct musb *);
extern void musb_hnp_stop(struct musb *musb);
+extern void
+musb_queue_on_resume(struct musb *musb,
+ void (*callback)(struct musb *musb, void *data),
+ void *data);
+
static inline void musb_platform_set_vbus(struct musb *musb, int is_on)
{
if (musb->ops->set_vbus)
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -188,9 +188,8 @@ static void dsps_musb_disable(struct musb *musb)
musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
}
-static void otg_timer(unsigned long _musb)
+static void dsps_check_status(struct musb *musb)
{
- struct musb *musb = (void *)_musb;
void __iomem *mregs = musb->mregs;
struct device *dev = musb->controller;
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
@@ -198,11 +197,6 @@ static void otg_timer(unsigned long _musb)
u8 devctl;
unsigned long flags;
int skip_session = 0;
- int err;
-
- err = pm_runtime_get_sync(dev);
- if (err < 0)
- dev_err(dev, "Poll could not pm_runtime_get: %i\n", err);
/*
* We poll because DSPS IP's won't expose several OTG-critical
@@ -246,6 +240,27 @@ static void otg_timer(unsigned long _musb)
break;
}
spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+static void dsps_check_status_resume_work(struct musb *musb, void *unused)
+{
+ dsps_check_status(musb);
+}
+
+static void otg_timer(unsigned long _musb)
+{
+ struct musb *musb = (void *)_musb;
+ struct device *dev = musb->controller;
+ int err;
+
+ err = pm_runtime_get(dev);
+ if (err < 0)
+ dev_err(dev, "Poll could not pm_runtime_get: %i\n", err);
+
+ if (pm_runtime_active(dev))
+ dsps_check_status(musb);
+ else
+ musb_queue_on_resume(musb, dsps_check_status_resume_work, NULL);
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1222,6 +1222,13 @@ void musb_ep_restart(struct musb *musb, struct musb_request *req)
rxstate(musb, req);
}
+void musb_ep_restart_resume_work(struct musb *musb, void *data)
+{
+ struct musb_request *req = data;
+
+ musb_ep_restart(musb, req);
+}
+
static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
gfp_t gfp_flags)
{
@@ -1255,7 +1262,7 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
map_dma_buffer(request, musb, musb_ep);
- pm_runtime_get_sync(musb->controller);
+ pm_runtime_get(musb->controller);
spin_lock_irqsave(&musb->lock, lockflags);
/* don't queue if the ep is down */
@@ -1271,8 +1278,13 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
list_add_tail(&request->list, &musb_ep->req_list);
/* it this is the head of the queue, start i/o ... */
- if (!musb_ep->busy && &request->list == musb_ep->req_list.next)
- musb_ep_restart(musb, request);
+ if (!musb_ep->busy && &request->list == musb_ep->req_list.next) {
+ if (pm_runtime_active(musb->controller))
+ musb_ep_restart(musb, request);
+ else
+ musb_queue_on_resume(musb, musb_ep_restart_resume_work,
+ request);
+ }
unlock:
spin_unlock_irqrestore(&musb->lock, lockflags);
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
