Hi Roger, On 2016년 10월 07일 18:18, Roger Quadros wrote: > Hi Chanwoo, > > > On 27/09/16 08:48, Peter Chen wrote: >> On Tue, Sep 20, 2016 at 05:53:55PM +0300, Roger Quadros wrote: >>> Driver can now work with both ID and VBUS pins or either one of >>> them. >>> >>> There can be the following 3 cases >>> >>> 1) Both ID and VBUS GPIOs are available: >>> >>> ID = LOW -> USB_HOST active, USB inactive >>> ID = HIGH -> USB_HOST inactive, USB state is same as VBUS. >>> >>> 2) Only ID GPIO is available: >>> >>> ID = LOW -> USB_HOST active, USB inactive >>> ID = HIGH -> USB_HOST inactive, USB active >>> >>> 3) Only VBUS GPIO is available: >>> >>> VBUS = LOW -> USB_HOST inactive, USB inactive >>> VBUS = HIGH -> USB_HOST inactive, USB active >>> >>> Signed-off-by: Roger Quadros <rogerq@xxxxxx> > > Can you please pick this one for v4.9? Thanks. Applied it. Best Regards, Chanwoo Choi [snip] -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
