On 17 October 2016 at 23:10, Hauke Mehrtens <hauke@xxxxxxxxxx> wrote:
> On 10/17/2016 10:30 PM, Rafał Miłecki wrote:
>> From: Rafał Miłecki <rafal@xxxxxxxxxx>
>>
>> Broadcom's Northstar XHCI controllers seem to need a special start
>> procedure to work correctly. There isn't any official documentation of
>> this, the problem is that controller doesn't detect any connected
>> devices with default setup. Moreover connecting USB device to controller
>> that doesn't run properly can cause SoC's watchdog issues.
>>
>> A workaround that was successfully tested on multiple devices is to
>> perform a fake doorbell. This patch adds code for doing this and enables
>> it on BCM4708 family.
>>
>> Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
>> ---
>> V2: Enable quirk for brcm,bcm4708 machines instead of adding separated binding
>> for it. Thanks Rob for your comment on this.
>> ---
>> drivers/usb/host/xhci-plat.c | 6 +++++
>> drivers/usb/host/xhci.c | 63 +++++++++++++++++++++++++++++++++++++++++---
>> drivers/usb/host/xhci.h | 1 +
>> 3 files changed, 67 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
>> index ed56bf9..b01a3be 100644
>> --- a/drivers/usb/host/xhci-plat.c
>> +++ b/drivers/usb/host/xhci-plat.c
>> @@ -56,12 +56,18 @@ static int xhci_priv_init_quirk(struct usb_hcd *hcd)
>>
>> static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
>> {
>> + struct platform_device *pdev = to_platform_device(dev);
>> + struct device_node *node = pdev->dev.of_node;
>> +
>> /*
>> * As of now platform drivers don't provide MSI support so we ensure
>> * here that the generic code does not try to make a pci_dev from our
>> * dev struct in order to setup MSI
>> */
>> xhci->quirks |= XHCI_PLAT;
>> +
>> + if (node && of_machine_is_compatible("brcm,bcm4708"))
>> + xhci->quirks |= XHCI_FAKE_DOORBELL;
>
> Are you sure only the bcm4708 and similar SoCs are affected? Having here
> a list with 3 or more checks would looks strange. I prefer your first patch.
>
> @Florian do you know if other Broadcom SoC are affected by this problem
> or are only Northstar SoCs affected?
I also believed usb3-fake-doorbell property looks nicer, but then just
followed Rob's suggestion.
I don't know about Northstar Plus or Northstar 2, I just know it's not
needed for BCM53573.
--
Rafał
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
