I'm not sure what I'm doing wrong:
I'm trying to get the from statement to read original author (Allan
Chou) first, and then me (Chris Roth) second. I've used the following
two commands:
git format-patch -o /tmp/ --subject-prefix="PATCH v2" --from="Allan
Chou <allan@xxxxxxxxxxx>" HEAD^
and
git send-email --to linux-usb@xxxxxxxxxxxxxxx --to
netdev@xxxxxxxxxxxxxxx --to linux-kernel@xxxxxxxxxxxxxxx --from="Allan
Chou <allan@xxxxxxxxxxx>"
/tmp/0001-Net-Driver-Add-Cypress-GX3-VID-04b4-PID-3610.patch
I thought that adding the --from portions to the git format-patch and
git send-email commands would force the addition of Allan to the top
of the patch, but it hasn't. Can anyone tell me specifically how I
need to change these commands in order to get the desired result? Then
I'll submit a PATCH v3.
Regards,
Chris
On Mon, Sep 26, 2016 at 3:48 PM, Allan Chou <allan@xxxxxxxxxxx> wrote:
> From: Chris Roth <chris.roth@xxxxxxxx>
>
> Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet
> Bridge Controller (Vendor=04b4 ProdID=3610).
>
> Patch verified on x64 linux kernel 4.7.4 system with the
> Kensington SD4600P USB-C Universal Dock with Power, which uses the
> Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
>
> A similar patch was signed-off and tested-by Allan Chou
> <allan@xxxxxxxxxxx> on 2015-12-01.
>
> Allan verified his similar patch on x86 Linux kernel 4.1.6 system
> with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
>
> Tested-by: Allan Chou <allan@xxxxxxxxxxx>
> Tested-by: Chris Roth <chris.roth@xxxxxxxx>
>
> Signed-off-by: Allan Chou <allan@xxxxxxxxxxx>
> Signed-off-by: Chris Roth <chris.roth@xxxxxxxx>
> ---
> drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
> index e6338c1..8a6675d 100644
> --- a/drivers/net/usb/ax88179_178a.c
> +++ b/drivers/net/usb/ax88179_178a.c
> @@ -1656,6 +1656,19 @@ static const struct driver_info ax88178a_info = {
> .tx_fixup = ax88179_tx_fixup,
> };
>
> +static const struct driver_info cypress_GX3_info = {
> + .description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller",
> + .bind = ax88179_bind,
> + .unbind = ax88179_unbind,
> + .status = ax88179_status,
> + .link_reset = ax88179_link_reset,
> + .reset = ax88179_reset,
> + .stop = ax88179_stop,
> + .flags = FLAG_ETHER | FLAG_FRAMING_AX,
> + .rx_fixup = ax88179_rx_fixup,
> + .tx_fixup = ax88179_tx_fixup,
> +};
> +
> static const struct driver_info dlink_dub1312_info = {
> .description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter",
> .bind = ax88179_bind,
> @@ -1718,6 +1731,10 @@ static const struct usb_device_id products[] = {
> USB_DEVICE(0x0b95, 0x178a),
> .driver_info = (unsigned long)&ax88178a_info,
> }, {
> + /* Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller */
> + USB_DEVICE(0x04b4, 0x3610),
> + .driver_info = (unsigned long)&cypress_GX3_info,
> +}, {
> /* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */
> USB_DEVICE(0x2001, 0x4a00),
> .driver_info = (unsigned long)&dlink_dub1312_info,
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
