On Tue, Sep 20, 2016 at 11:36:39AM +0800, Peter Chen wrote: > Hi all, > > This is a follow-up for my last power sequence framework patch set [1]. > According to Rob Herring and Ulf Hansson's comments[2]. The kinds of > power sequence instances will be added at postcore_initcall, the match > criteria is compatible string first, if the compatible string is not > matched between dts and library, it will try to use generic power sequence. > > The host driver just needs to call of_pwrseq_on/of_pwrseq_off > if only one power sequence instance is needed, for more power sequences > are used, using of_pwrseq_on_list/of_pwrseq_off_list instead (eg, USB hub driver). > > In future, if there are special power sequence requirements, the special > power sequence library can be created. > > This patch set is tested on i.mx6 sabresx evk using a dts change, I use > two hot-plug devices to simulate this use case, the related binding > change is updated at patch [1/6], The udoo board changes were tested > using my last power sequence patch set.[3] > > Except for hard-wired MMC and USB devices, I find the USB ULPI PHY also > need to power on itself before it can be found by ULPI bus. > > [1] http://www.spinics.net/lists/linux-usb/msg142755.html > [2] http://www.spinics.net/lists/linux-usb/msg143106.html > [3] http://www.spinics.net/lists/linux-usb/msg142815.html > > Changes for v7: > - Create kinds of power sequence instance at postcore_initcall, and match > the instance with node using compatible string, the beneit of this is > the host driver doesn't need to consider which pwrseq instance needs > to be used, and pwrseq core will match it, however, it eats some memories > if less power sequence instances are used. [Patch 2/8] > - Add pwrseq_compatible_sample.c to test match pwrseq using device_id. [Patch 2/8] > - Fix the comments Vaibhav Hiremath adds for error path for clock and do not > use device_node for parameters at pwrseq_on. [Patch 2/8] > - Simplify the caller to use power sequence, follows Alan's commnets [Patch 4/8] > - Tested three pwrseq instances together using both specific compatible string and > generic libraries. > Hi Vaibhav, would you please test if this series can support your case, you can add one instance like pwrseq_compatible_sample? If you are busy now, but think this series can satisfy your requirement, please ack it. I will delete pwrseq_compatible_sample, and only submit the generic one at next revision, you can add it later, thanks. Peter > Changes for v6: > - Add Matthias Kaehlcke's Reviewed-by and Tested-by. (patch [2/6]) > - Change chipidea core of_node assignment for coming user. (patch [5/6]) > - Applies Joshua Clayton's three dts changes for two boards, > the USB device's reg has only #address-cells, but without #size-cells. > > Changes for v5: > - Delete pwrseq_register/pwrseq_unregister, which is useless currently > - Fix the linker error when the pwrseq user is compiled as module > > Changes for v4: > - Create the patch on next-20160722 > - Fix the of_node is not NULL after chipidea driver is unbinded [Patch 5/6] > - Using more friendly wait method for reset gpio [Patch 2/6] > - Support multiple input clocks [Patch 2/6] > - Add Rob Herring's ack for DT changes > - Add Joshua Clayton's Tested-by > > Changes for v3: > - Delete "power-sequence" property at binding-doc, and change related code > at both library and user code. > - Change binding-doc example node name with Rob's comments > - of_get_named_gpio_flags only gets the gpio, but without setting gpio flags, > add additional code request gpio with proper gpio flags > - Add Philipp Zabel's Ack and MAINTAINER's entry > > Changes for v2: > - Delete "pwrseq" prefix and clock-names for properties at dt binding > - Should use structure not but its pointer for kzalloc > - Since chipidea core has no of_node, let core's of_node equals glue > layer's at core's probe > > Joshua Clayton (2): > ARM: dts: imx6qdl: Enable usb node children with <reg> > ARM: dts: imx6q-evi: Fix onboard hub reset line > > Peter Chen (6): > binding-doc: power: pwrseq-generic: add binding doc for generic power > sequence library > power: add power sequence library > binding-doc: usb: usb-device: add optional properties for power > sequence > usb: core: add power sequence handling for USB devices > usb: chipidea: let chipidea core device of_node equal's glue layer > device of_node > ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB property > > .../bindings/power/pwrseq/pwrseq-generic.txt | 48 ++++++ > .../devicetree/bindings/usb/usb-device.txt | 10 +- > MAINTAINERS | 9 + > arch/arm/boot/dts/imx6q-evi.dts | 25 +-- > arch/arm/boot/dts/imx6qdl-udoo.dtsi | 26 ++- > arch/arm/boot/dts/imx6qdl.dtsi | 6 + > drivers/power/Kconfig | 1 + > drivers/power/Makefile | 1 + > drivers/power/pwrseq/Kconfig | 45 +++++ > drivers/power/pwrseq/Makefile | 3 + > drivers/power/pwrseq/core.c | 190 +++++++++++++++++++++ > drivers/power/pwrseq/pwrseq_compatible_sample.c | 178 +++++++++++++++++++ > drivers/power/pwrseq/pwrseq_generic.c | 177 +++++++++++++++++++ > drivers/usb/chipidea/core.c | 27 ++- > drivers/usb/core/hub.c | 41 ++++- > drivers/usb/core/hub.h | 1 + > include/linux/power/pwrseq.h | 73 ++++++++ > 17 files changed, 820 insertions(+), 41 deletions(-) > create mode 100644 Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt > create mode 100644 drivers/power/pwrseq/Kconfig > create mode 100644 drivers/power/pwrseq/Makefile > create mode 100644 drivers/power/pwrseq/core.c > create mode 100644 drivers/power/pwrseq/pwrseq_compatible_sample.c > create mode 100644 drivers/power/pwrseq/pwrseq_generic.c > create mode 100644 include/linux/power/pwrseq.h > > -- > 2.7.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Best Regards, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
