Hello, did you try without your patches, to see if you can reproduce the problem? I can fix my issues if I disable usb autosuspend To narrow down the causes I can think of: *) Some hardware issue only on my side -> please try to reproduce it with an unpached kernel *) Some other stuff I modified -> gonna try a clean kernel with just your patches (hopefully will find time on sunday) *) Maybe some different kernel config options -> mine are multi_v7_defconfig with a few modules added Kind regards, Norbert 2016-09-24 20:53 GMT+02:00 ayaka <ayaka@xxxxxxxxxxx>: > > On 09/23/2016 03:10 PM, Norbert Lange wrote: >> >> Hi, >> >> I wanted to reply to the Linux mailing List (your patch thread), I >> dont know exactly where since the addresses are blanked out. >> Just tell me where I should move this discussion. >> >> The board can use both USB peripherals (haven`t tested the OTG Port). >> The issue starts if the board has *no* USB peripherals attached >> (either booting without any USB peripherals, or disconnecting all >> peripherals). > > I have checked my patches with kernel next-20160923, I didn't meet your > problem. The firefly RK3288 release board works fine. > >> *Then* I cant connect a single peripheral, just getting read errors. >> >> Seems like something is getting powered down if no USB peripheral is >> connected, and can`t start up again. >> >> Kind regard, >> Norbert >> >> 2016-09-23 2:48 GMT+02:00 Ayaka <ayaka@xxxxxxxxxxx>: >>> >>> >>> 從我的 iPad 傳送 >>> >>>> Norbert Lange <nolange79@xxxxxxxxx> 於 2016年9月23日 上午7:37 寫道： >>>> >>>> Hello Randi, >>>> I am Randy >>>> sorry for stalking you, but I have a problem with the USB Ports on >>> >>> You have better CC to Linux-use as well >>>> >>>> RK3288 and Heiko pointed me to your patch [1]. >>>> >>>> Firefly RK3288 >>>> Linux Kernel 4.8rc3 with multi_v7_defconfig and some additional >>>> modules and mali drm driver >>>> Your patch v7 applied [2] >>>> >>>> [1] https://irclog.whitequark.org/linux-rockchip/2016-09-20 >>>> [2] https://www.spinics.net/lists/linux-usb/msg146496.html >>>> >>>> I can easily reproduce the issue, if no USB Device is connected then >>>> attaching USB Devices will produce Read Errors. >>>> The only way around that is to always leave one device connected. >>>> >>> So the board could only connect to use one usb peripheral device? >>>> >>>> # plug in an USB Stick >>>> Sep 10 23:05:19 hipase2firefly kernel: usb 1-1: reset high-speed USB >>>> device numb >>>> Sep 10 23:05:24 hipase2firefly kernel: usb 1-1: device descriptor >>>> read/64, error >>>> Sep 10 23:05:40 hipase2firefly kernel: usb 1-1: device descriptor >>>> read/64, error >>>> Sep 10 23:05:42 hipase2firefly kernel: usb usb1-port1: Cannot enable. >>>> Maybe the >>>> Sep 10 23:05:43 hipase2firefly kernel: usb usb1-port1: Cannot enable. >>>> Maybe the >>>> Sep 10 23:05:44 hipase2firefly kernel: usb usb1-port1: Cannot enable. >>>> Maybe the >>>> Sep 10 23:05:44 hipase2firefly kernel: usb 1-1: USB disconnect, device >>>> number 2 >>>> Sep 10 23:05:45 hipase2firefly kernel: usb usb1-port1: Cannot enable. >>>> Maybe the >>>> Sep 10 23:05:47 hipase2firefly kernel: usb usb1-port1: Cannot enable. >>>> Maybe the >>>> Sep 10 23:05:48 hipase2firefly kernel: usb usb1-port1: Cannot enable. >>>> Maybe the >>>> Sep 10 23:05:49 hipase2firefly kernel: usb usb1-port1: Cannot enable. >>>> Maybe the >>>> Sep 10 23:05:49 hipase2firefly kernel: usb usb1-port1: unable to >>>> enumerate USB d >>>> >>>> # reset without disconnecting USB >>>> # connecting a second USB Device (Logitech Receiver) >>>> >>>> Sep 10 23:03:14 hipase2firefly kernel: usb 1-1.4: new full-speed USB >>>> device numb >>>> Sep 10 23:03:14 hipase2firefly mtp-probe[2207]: checking bus 1, device >>>> 4: "/sys/ >>>> Sep 10 23:03:14 hipase2firefly mtp-probe[2207]: bus: 1, device: 4 was >>>> not an MTP >>>> Sep 10 23:03:14 hipase2firefly kernel: logitech-djreceiver >>>> 0003:046D:C52B.0003: >>>> Sep 10 23:03:14 hipase2firefly kernel: input: Logitech K400 as >>>> /devices/platform >>>> Sep 10 23:03:14 hipase2firefly kernel: logitech-hidpp-device >>>> 0003:046D:4024.0004 >>>> >>>> # disconnectin 1 USB Device >>>> Sep 10 23:04:00 hipase2firefly kernel: usb 1-1.4: USB disconnect, device >>>> number >>>> >>>> #reconnecting the same device >>>> Sep 10 23:05:49 hipase2firefly kernel: usb 1-1.4: new full-speed USB >>>> device numb >>>> Sep 10 23:05:49 hipase2firefly kernel: logitech-djreceiver >>>> 0003:046D:C52B.0007: >>>> Sep 10 23:05:49 hipase2firefly mtp-probe[2276]: checking bus 1, device >>>> 5: "/sys/ >>>> Sep 10 23:05:49 hipase2firefly mtp-probe[2276]: bus: 1, device: 5 was >>>> not an MTP >>>> Sep 10 23:05:49 hipase2firefly kernel: input: Logitech K400 as >>>> /devices/platform >>>> Sep 10 23:05:49 hipase2firefly kernel: logitech-hidpp-device >>>> 0003:046D:4024.0008 >>>> >>>> # disconnecting both USB Devices >>>> Sep 10 23:06:45 hipase2firefly kernel: usb 1-1.4: USB disconnect, device >>>> number >>>> Sep 10 23:06:49 hipase2firefly kernel: usb 1-1.1: USB disconnect, device >>>> number >>>> Sep 10 23:06:49 hipase2firefly systemd-udevd[2339]: >>>> inotify_add_watch(9, /dev/sdb, 10) failed: No such file or directory >>>> >>>> # reconnecting the Logitech Receiver >>>> Sep 10 23:08:40 hipase2firefly kernel: usb 1-1: reset high-speed USB >>>> device number 2 using dwc2 >>>> Sep 10 23:08:46 hipase2firefly kernel: usb 1-1: device descriptor >>>> read/64, error -110 >>>> Sep 10 23:09:01 hipase2firefly kernel: usb 1-1: device descriptor >>>> read/64, error -110 >>>> Sep 10 23:09:03 hipase2firefly kernel: usb usb1-port1: Cannot enable. >>>> Maybe the >>>> Sep 10 23:09:04 hipase2firefly kernel: usb usb1-port1: Cannot enable. >>>> Maybe the >>>> Sep 10 23:09:05 hipase2firefly kernel: usb usb1-port1: Cannot enable. >>>> Maybe the >>>> Sep 10 23:09:05 hipase2firefly kernel: usb 1-1: USB disconnect, device >>>> number 2 >>>> Sep 10 23:09:07 hipase2firefly kernel: usb usb1-port1: Cannot enable. >>>> Maybe the >>>> Sep 10 23:09:08 hipase2firefly kernel: usb usb1-port1: Cannot enable. >>>> Maybe the >>>> Sep 10 23:09:09 hipase2firefly kernel: usb usb1-port1: Cannot enable. >>>> Maybe the >>>> Sep 10 23:09:11 hipase2firefly kernel: usb usb1-port1: Cannot enable. >>>> Maybe the >>>> Sep 10 23:09:11 hipase2firefly kernel: usb usb1-port1: unable to >>>> enumerate USB device >>>> >>>> Kind regards, >>>> Norbert > > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
