Due to my lack of familiarity with the how git send-email works, I've
unintentionally had my name listed as the first 'from' whereas I
intended Allan Chou to be listed as the first 'from' in the patch. If
anyone can correct this on my behalf, I would appreciate it.
Regards,
Chris
On Sat, Sep 24, 2016 at 10:57 AM, Chris Roth <chris.roth@xxxxxxxx> wrote:
>
> Due to my lack of familiarity with the how git send-email works, I've unintentionally had my name listed as the first 'from' whereas I intended Allan Chou to be listed as the first 'from' in the patch. If anyone can correct this on my behalf, I would appreciate it.
>
> Regards,
> Chris
>
> On Fri, Sep 23, 2016 at 4:24 PM, <chris.roth@xxxxxxxx> wrote:
>>
>> From: Chris Roth <chris.roth@xxxxxxxx>
>>
>> From: Allan Chou <allan@xxxxxxxxxxx>
>>
>> Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet
>> Bridge Controller (Vendor=04b4 ProdID=3610).
>>
>> Patch verified on x64 linux kernel 4.7.4 system with the
>> Kensington SD4600P USB-C Universal Dock with Power, which uses the
>> Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
>>
>> A similar patch was signed-off and tested-by Allan Chou
>> <allan@xxxxxxxxxxx> on 2015-12-01.
>>
>> Allan verified his similar patch on x86 Linux kernel 4.1.6 system
>> with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.
>>
>> Tested-by: Allan Chou <allan@xxxxxxxxxxx>
>> Tested-by: Chris Roth <chris.roth@xxxxxxxx>
>>
>> Signed-off-by: Allan Chou <allan@xxxxxxxxxxx>
>> Signed-off-by: Chris Roth <chris.roth@xxxxxxxx>
>> ---
>> drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++
>> 1 file changed, 17 insertions(+)
>>
>> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
>> index e6338c1..8a6675d 100644
>> --- a/drivers/net/usb/ax88179_178a.c
>> +++ b/drivers/net/usb/ax88179_178a.c
>> @@ -1656,6 +1656,19 @@ static const struct driver_info ax88178a_info = {
>> .tx_fixup = ax88179_tx_fixup,
>> };
>>
>> +static const struct driver_info cypress_GX3_info = {
>> + .description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller",
>> + .bind = ax88179_bind,
>> + .unbind = ax88179_unbind,
>> + .status = ax88179_status,
>> + .link_reset = ax88179_link_reset,
>> + .reset = ax88179_reset,
>> + .stop = ax88179_stop,
>> + .flags = FLAG_ETHER | FLAG_FRAMING_AX,
>> + .rx_fixup = ax88179_rx_fixup,
>> + .tx_fixup = ax88179_tx_fixup,
>> +};
>> +
>> static const struct driver_info dlink_dub1312_info = {
>> .description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter",
>> .bind = ax88179_bind,
>> @@ -1718,6 +1731,10 @@ static const struct usb_device_id products[] = {
>> USB_DEVICE(0x0b95, 0x178a),
>> .driver_info = (unsigned long)&ax88178a_info,
>> }, {
>> + /* Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller */
>> + USB_DEVICE(0x04b4, 0x3610),
>> + .driver_info = (unsigned long)&cypress_GX3_info,
>> +}, {
>> /* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */
>> USB_DEVICE(0x2001, 0x4a00),
>> .driver_info = (unsigned long)&dlink_dub1312_info,
>> --
>> 2.7.4
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
