Hi, On 21/09/16 09:12, Peter Chen wrote:
On Mon, Sep 19, 2016 at 01:45:39PM +0200, Fabien Lahoudere wrote:In order to use ULPI phy with usb host 2 and 3, we need to configure controller register to enable ULPI features. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxxxx> --- drivers/usb/chipidea/ci_hdrc_imx.c | 5 +++++ drivers/usb/chipidea/ci_hdrc_imx.h | 1 + drivers/usb/chipidea/usbmisc_imx.c | 37 +++++++++++++++++++++++++++++++++++++ 3 files changed, 43 insertions(+) diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 0991794..96c0e33 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -18,6 +18,7 @@ #include <linux/pm_runtime.h> #include <linux/dma-mapping.h> #include <linux/usb/chipidea.h> +#include <linux/usb/of.h> #include <linux/clk.h> #include "ci.h" @@ -146,6 +147,10 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev) if (of_find_property(np, "external-vbus-divider", NULL)) data->evdo = 1; + + if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI) + data->ulpi = 1; + return data; } diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h index 409aa5ca8..d666c9f 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.h +++ b/drivers/usb/chipidea/ci_hdrc_imx.h @@ -19,6 +19,7 @@ struct imx_usbmisc_data { unsigned int disable_oc:1; /* over current detect disabled */ unsigned int oc_polarity:1; /* over current polarity if oc enabled */ unsigned int evdo:1; /* set external vbus divider option */ + unsigned int ulpi:1; /* connected to an ULPI phy */ }; int imx_usbmisc_init(struct imx_usbmisc_data *); diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index 9549821..11f51bd 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -46,11 +46,20 @@ #define MX53_USB_OTG_PHY_CTRL_0_OFFSET 0x08 #define MX53_USB_OTG_PHY_CTRL_1_OFFSET 0x0c +#define MX53_USB_CTRL_1_OFFSET 0x10 +#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK (0x11 << 2) +#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI BIT(2) +#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK (0x11 << 6) +#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI BIT(6) #define MX53_USB_UH2_CTRL_OFFSET 0x14 #define MX53_USB_UH3_CTRL_OFFSET 0x18 #define MX53_BM_OVER_CUR_DIS_H1 BIT(5) #define MX53_BM_OVER_CUR_DIS_OTG BIT(8) #define MX53_BM_OVER_CUR_DIS_UHx BIT(30) +#define MX53_USB_CTRL_1_UH2_ULPI_EN BIT(26) +#define MX53_USB_CTRL_1_UH3_ULPI_EN BIT(27) +#define MX53_USB_UHx_CTRL_WAKE_UP_EN BIT(7) +#define MX53_USB_UHx_CTRL_ULPI_INT_EN BIT(8) #define MX53_USB_PHYCTRL1_PLLDIV_MASK 0x3 #define MX53_USB_PLL_DIV_24_MHZ 0x01 @@ -217,6 +226,20 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data) } break; case 2: + if (data->ulpi) { + /* set USBH2 into ULPI-mode. */ + reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET; + val = readl(reg) | MX53_USB_CTRL_1_UH2_ULPI_EN; + /* select ULPI clock */ + val &= ~MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK; + val |= MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI; + writel(val, reg); + /* Set interrupt wake up enable */ + reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET; + val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN + | MX53_USB_UHx_CTRL_ULPI_INT_EN; + writel(val, reg); + }Ok, it seems your 1st patch is just let code structure change be easy in this one, and I may give the wrong comments that you had improved disable oc code before. If you agree with me, would you squash these two into one, and send again. (delete "reg && val" is necessary).
ok I will squash. =-D
Peterif (data->disable_oc) { reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET; val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx; @@ -224,6 +247,20 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data) } break; case 3: + if (data->ulpi) { + /* set USBH3 into ULPI-mode. */ + reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET; + val = readl(reg) | MX53_USB_CTRL_1_UH3_ULPI_EN; + /* select ULPI clock */ + val &= ~MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK; + val |= MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI; + writel(val, reg); + /* Set interrupt wake up enable */ + reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET; + val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN + | MX53_USB_UHx_CTRL_ULPI_INT_EN; + writel(val, reg); + } if (data->disable_oc) { reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET; val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx; -- 2.1.4
-- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
