In order to use ULPI phy with usb host 2 and 3, we need to configure
controller register to enable ULPI features.
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxxxx>
---
drivers/usb/chipidea/ci_hdrc_imx.c | 5 +++++
drivers/usb/chipidea/ci_hdrc_imx.h | 1 +
drivers/usb/chipidea/usbmisc_imx.c | 37 +++++++++++++++++++++++++++++++++++++
3 files changed, 43 insertions(+)
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 0991794..96c0e33 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -18,6 +18,7 @@
#include <linux/pm_runtime.h>
#include <linux/dma-mapping.h>
#include <linux/usb/chipidea.h>
+#include <linux/usb/of.h>
#include <linux/clk.h>
#include "ci.h"
@@ -146,6 +147,10 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
if (of_find_property(np, "external-vbus-divider", NULL))
data->evdo = 1;
+
+ if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI)
+ data->ulpi = 1;
+
return data;
}
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
index 409aa5ca8..d666c9f 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.h
+++ b/drivers/usb/chipidea/ci_hdrc_imx.h
@@ -19,6 +19,7 @@ struct imx_usbmisc_data {
unsigned int disable_oc:1; /* over current detect disabled */
unsigned int oc_polarity:1; /* over current polarity if oc enabled */
unsigned int evdo:1; /* set external vbus divider option */
+ unsigned int ulpi:1; /* connected to an ULPI phy */
};
int imx_usbmisc_init(struct imx_usbmisc_data *);
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index ed324d1..5472900 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -46,11 +46,20 @@
#define MX53_USB_OTG_PHY_CTRL_0_OFFSET 0x08
#define MX53_USB_OTG_PHY_CTRL_1_OFFSET 0x0c
+#define MX53_USB_CTRL_1_OFFSET 0x10
+#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK (0x11 << 2)
+#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI BIT(2)
+#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK (0x11 << 6)
+#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI BIT(6)
#define MX53_USB_UH2_CTRL_OFFSET 0x14
#define MX53_USB_UH3_CTRL_OFFSET 0x18
#define MX53_BM_OVER_CUR_DIS_H1 BIT(5)
#define MX53_BM_OVER_CUR_DIS_OTG BIT(8)
#define MX53_BM_OVER_CUR_DIS_UHx BIT(30)
+#define MX53_USB_CTRL_1_UH2_ULPI_EN BIT(26)
+#define MX53_USB_CTRL_1_UH3_ULPI_EN BIT(27)
+#define MX53_USB_UHx_CTRL_WAKE_UP_EN BIT(7)
+#define MX53_USB_UHx_CTRL_ULPI_INT_EN BIT(8)
#define MX53_USB_PHYCTRL1_PLLDIV_MASK 0x3
#define MX53_USB_PLL_DIV_24_MHZ 0x01
@@ -219,6 +228,20 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
}
break;
case 2:
+ if (data->ulpi) {
+ /* set USBH2 into ULPI-mode. */
+ reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET;
+ val = readl(reg) | MX53_USB_CTRL_1_UH2_ULPI_EN;
+ /* select ULPI clock */
+ val &= ~MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK;
+ val |= MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI;
+ writel(val, reg);
+ /* Set interrupt wake up enable */
+ reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
+ val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
+ | MX53_USB_UHx_CTRL_ULPI_INT_EN;
+ writel(val, reg);
+ }
if (data->disable_oc) {
reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
@@ -227,6 +250,20 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
}
break;
case 3:
+ if (data->ulpi) {
+ /* set USBH3 into ULPI-mode. */
+ reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET;
+ val = readl(reg) | MX53_USB_CTRL_1_UH3_ULPI_EN;
+ /* select ULPI clock */
+ val &= ~MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK;
+ val |= MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI;
+ writel(val, reg);
+ /* Set interrupt wake up enable */
+ reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
+ val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
+ | MX53_USB_UHx_CTRL_ULPI_INT_EN;
+ writel(val, reg);
+ }
if (data->disable_oc) {
reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
