When I upgraded my laptop from Debian Etch (using kernel 2.6.18) to Lenny (kernel 2.6.26), I was no longer able to access my Pentax Optio E50 compact camera. I even tried compiling newer kernels, but it did not help. Camera worked fine with same cable with Etch and it still works fine in Windows XP. I have added dmesg log (in the end I disconnected device) - with 2.6.28.2 kernel: [ 167.396135] usb 4-3: new high speed USB device using ehci_hcd and address 2 [ 167.573136] usb 4-3: configuration #1 chosen from 1 choice [ 167.582613] usb 4-3: New USB device found, idVendor=0a17, idProduct=00a7 [ 167.582619] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 167.582623] usb 4-3: Product: Optio E50 [ 167.582625] usb 4-3: Manufacturer: PENTAX Corporation [ 167.582628] usb 4-3: SerialNumber: 1153315 [ 167.690378] Initializing USB Mass Storage driver... [ 167.690438] usb-storage: USB Mass Storage device detected [ 167.693001] usb-storage: -- associate_dev [ 167.693009] usb-storage: Vendor: 0x0a17, Product: 0x00a7, Revision: 0x0100 [ 167.693012] usb-storage: Interface Subclass: 0x06, Protocol: 0x50 [ 167.693022] usb-storage: Transport: Bulk [ 167.693024] usb-storage: Protocol: Transparent SCSI [ 167.693304] scsi2 : SCSI emulation for USB Mass Storage devices [ 167.693379] usb-storage: *** thread sleeping. [ 167.693604] usbcore: registered new interface driver usb-storage [ 167.693608] USB Mass Storage support registered. [ 167.710114] usb-storage: device found at 2 [ 167.710120] usb-storage: waiting for device to settle before scanning [ 172.708022] usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1 [ 172.708162] usb-storage: GetMaxLUN command result is 1, data is 0 [ 172.720033] usb-storage: device scan complete [ 172.720135] usb-storage: queuecommand called [ 172.720143] usb-storage: *** thread awakened. [ 172.720147] usb-storage: Command INQUIRY (6 bytes) [ 172.720149] usb-storage: 12 00 00 00 24 00 [ 172.720157] usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6 [ 172.720162] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.720281] usb-storage: Status code 0; transferred 31/31 [ 172.720283] usb-storage: -- transfer complete [ 172.720286] usb-storage: Bulk command transfer result=0 [ 172.720289] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries [ 172.720404] usb-storage: Status code 0; transferred 36/36 [ 172.720406] usb-storage: -- transfer complete [ 172.720409] usb-storage: Bulk data transfer result 0x0 [ 172.720411] usb-storage: Attempting to get CSW... [ 172.720414] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.720527] usb-storage: Status code 0; transferred 13/13 [ 172.720529] usb-storage: -- transfer complete [ 172.720532] usb-storage: Bulk status result = 0 [ 172.720534] usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0 [ 172.720539] usb-storage: scsi cmd done, result=0x0 [ 172.720543] usb-storage: *** thread sleeping. [ 172.720607] scsi 2:0:0:0: Direct-Access PENTAX Optio E50 1.00 PQ: 0 ANSI: 0 CCS [ 172.720633] usb-storage: queuecommand called [ 172.720638] usb-storage: *** thread awakened. [ 172.720641] usb-storage: Bad LUN (0:1) [ 172.720643] usb-storage: scsi cmd done, result=0x40000 [ 172.720646] usb-storage: *** thread sleeping. [ 172.720677] usb-storage: queuecommand called [ 172.720683] usb-storage: *** thread awakened. [ 172.720685] usb-storage: Bad target number (1:0) [ 172.720687] usb-storage: scsi cmd done, result=0x40000 [ 172.720690] usb-storage: *** thread sleeping. [ 172.720715] usb-storage: queuecommand called [ 172.720720] usb-storage: *** thread awakened. [ 172.720722] usb-storage: Bad target number (2:0) [ 172.720725] usb-storage: scsi cmd done, result=0x40000 [ 172.720728] usb-storage: *** thread sleeping. [ 172.720751] usb-storage: queuecommand called [ 172.720755] usb-storage: *** thread awakened. [ 172.720758] usb-storage: Bad target number (3:0) [ 172.720760] usb-storage: scsi cmd done, result=0x40000 [ 172.720763] usb-storage: *** thread sleeping. [ 172.720786] usb-storage: queuecommand called [ 172.720791] usb-storage: *** thread awakened. [ 172.720793] usb-storage: Bad target number (4:0) [ 172.720796] usb-storage: scsi cmd done, result=0x40000 [ 172.720799] usb-storage: *** thread sleeping. [ 172.720822] usb-storage: queuecommand called [ 172.720826] usb-storage: *** thread awakened. [ 172.720829] usb-storage: Bad target number (5:0) [ 172.720831] usb-storage: scsi cmd done, result=0x40000 [ 172.720834] usb-storage: *** thread sleeping. [ 172.720878] usb-storage: queuecommand called [ 172.720882] usb-storage: *** thread awakened. [ 172.720885] usb-storage: Bad target number (6:0) [ 172.720887] usb-storage: scsi cmd done, result=0x40000 [ 172.720890] usb-storage: *** thread sleeping. [ 172.720914] usb-storage: queuecommand called [ 172.720918] usb-storage: *** thread awakened. [ 172.720921] usb-storage: Bad target number (7:0) [ 172.720923] usb-storage: scsi cmd done, result=0x40000 [ 172.720926] usb-storage: *** thread sleeping. [ 172.721040] usb-storage: queuecommand called [ 172.733432] usb-storage: *** thread awakened. [ 172.733440] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 172.733442] usb-storage: 00 00 00 00 00 00 [ 172.733451] usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6 [ 172.733455] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.736247] usb-storage: Status code 0; transferred 31/31 [ 172.736251] usb-storage: -- transfer complete [ 172.736253] usb-storage: Bulk command transfer result=0 [ 172.736256] usb-storage: Attempting to get CSW... [ 172.736258] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.740196] usb-storage: Status code 0; transferred 13/13 [ 172.740198] usb-storage: -- transfer complete [ 172.740201] usb-storage: Bulk status result = 0 [ 172.740204] usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x1 [ 172.740207] usb-storage: -- transport indicates command failure [ 172.740209] usb-storage: Issuing auto-REQUEST_SENSE [ 172.740214] usb-storage: Bulk Command S 0x43425355 T 0x3 L 18 F 128 Trg 0 LUN 0 CL 6 [ 172.740218] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.740280] usb-storage: Status code 0; transferred 31/31 [ 172.740283] usb-storage: -- transfer complete [ 172.740285] usb-storage: Bulk command transfer result=0 [ 172.740288] usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries [ 172.740404] usb-storage: Status code 0; transferred 18/18 [ 172.740406] usb-storage: -- transfer complete [ 172.740409] usb-storage: Bulk data transfer result 0x0 [ 172.740411] usb-storage: Attempting to get CSW... [ 172.740414] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.740529] usb-storage: Status code 0; transferred 13/13 [ 172.740531] usb-storage: -- transfer complete [ 172.740533] usb-storage: Bulk status result = 0 [ 172.740536] usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0 [ 172.740539] usb-storage: -- Result from auto-sense is 0 [ 172.740542] usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0 [ 172.740547] usb-storage: Unit Attention: Not ready to ready change, medium may have changed [ 172.740553] usb-storage: scsi cmd done, result=0x2 [ 172.740558] usb-storage: *** thread sleeping. [ 172.740598] usb-storage: queuecommand called [ 172.740604] usb-storage: *** thread awakened. [ 172.740607] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 172.740609] usb-storage: 00 00 00 00 00 00 [ 172.740616] usb-storage: Bulk Command S 0x43425355 T 0x4 L 0 F 0 Trg 0 LUN 0 CL 6 [ 172.740619] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.740653] usb-storage: Status code 0; transferred 31/31 [ 172.740656] usb-storage: -- transfer complete [ 172.740658] usb-storage: Bulk command transfer result=0 [ 172.740660] usb-storage: Attempting to get CSW... [ 172.740663] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.740901] usb-storage: Status code 0; transferred 13/13 [ 172.740904] usb-storage: -- transfer complete [ 172.740906] usb-storage: Bulk status result = 0 [ 172.740909] usb-storage: Bulk Status S 0x53425355 T 0x4 R 0 Stat 0x0 [ 172.740912] usb-storage: scsi cmd done, result=0x0 [ 172.740916] usb-storage: *** thread sleeping. [ 172.740940] usb-storage: queuecommand called [ 172.740945] usb-storage: *** thread awakened. [ 172.740948] usb-storage: Command READ_CAPACITY (10 bytes) [ 172.740950] usb-storage: 25 00 00 00 00 00 00 00 00 00 [ 172.740959] usb-storage: Bulk Command S 0x43425355 T 0x5 L 8 F 128 Trg 0 LUN 0 CL 10 [ 172.740963] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.741029] usb-storage: Status code 0; transferred 31/31 [ 172.741032] usb-storage: -- transfer complete [ 172.741034] usb-storage: Bulk command transfer result=0 [ 172.741037] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries [ 172.741153] usb-storage: Status code 0; transferred 8/8 [ 172.741155] usb-storage: -- transfer complete [ 172.741158] usb-storage: Bulk data transfer result 0x0 [ 172.741160] usb-storage: Attempting to get CSW... [ 172.741163] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.741277] usb-storage: Status code 0; transferred 13/13 [ 172.741280] usb-storage: -- transfer complete [ 172.741282] usb-storage: Bulk status result = 0 [ 172.741285] usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0 [ 172.741288] usb-storage: scsi cmd done, result=0x0 [ 172.741291] usb-storage: *** thread sleeping. [ 172.741309] sd 2:0:0:0: [sdb] 4022273 512-byte hardware sectors: (2.05 GB/1.91 GiB) [ 172.741319] usb-storage: queuecommand called [ 172.741323] usb-storage: *** thread awakened. [ 172.741326] usb-storage: Command MODE_SENSE (6 bytes) [ 172.741329] usb-storage: 1a 00 3f 00 c0 00 [ 172.741336] usb-storage: Bulk Command S 0x43425355 T 0x6 L 192 F 128 Trg 0 LUN 0 CL 6 [ 172.741339] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.741404] usb-storage: Status code 0; transferred 31/31 [ 172.741406] usb-storage: -- transfer complete [ 172.741409] usb-storage: Bulk command transfer result=0 [ 172.741412] usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries [ 172.741531] usb-storage: Status code -121; transferred 8/192 [ 172.741534] usb-storage: -- short read transfer [ 172.741536] usb-storage: Bulk data transfer result 0x1 [ 172.741539] usb-storage: Attempting to get CSW... [ 172.741541] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.741778] usb-storage: Status code 0; transferred 13/13 [ 172.741780] usb-storage: -- transfer complete [ 172.741782] usb-storage: Bulk status result = 0 [ 172.741785] usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x0 [ 172.741788] usb-storage: scsi cmd done, result=0x0 [ 172.741791] usb-storage: *** thread sleeping. [ 172.741802] sd 2:0:0:0: [sdb] Write Protect is off [ 172.741806] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 172.741809] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 172.741891] usb-storage: queuecommand called [ 172.741896] usb-storage: *** thread awakened. [ 172.741899] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 172.741901] usb-storage: 00 00 00 00 00 00 [ 172.741908] usb-storage: Bulk Command S 0x43425355 T 0x7 L 0 F 0 Trg 0 LUN 0 CL 6 [ 172.741911] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.742029] usb-storage: Status code 0; transferred 31/31 [ 172.742031] usb-storage: -- transfer complete [ 172.742033] usb-storage: Bulk command transfer result=0 [ 172.742036] usb-storage: Attempting to get CSW... [ 172.742038] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.742153] usb-storage: Status code 0; transferred 13/13 [ 172.742155] usb-storage: -- transfer complete [ 172.742158] usb-storage: Bulk status result = 0 [ 172.742161] usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0 [ 172.742163] usb-storage: scsi cmd done, result=0x0 [ 172.742166] usb-storage: *** thread sleeping. [ 172.742181] usb-storage: queuecommand called [ 172.742186] usb-storage: *** thread awakened. [ 172.742188] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) [ 172.742191] usb-storage: 1e 00 00 00 01 00 [ 172.742198] usb-storage: Bulk Command S 0x43425355 T 0x8 L 0 F 0 Trg 0 LUN 0 CL 6 [ 172.742201] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.742278] usb-storage: Status code 0; transferred 31/31 [ 172.742281] usb-storage: -- transfer complete [ 172.742283] usb-storage: Bulk command transfer result=0 [ 172.742285] usb-storage: Attempting to get CSW... [ 172.742288] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.742403] usb-storage: Status code 0; transferred 13/13 [ 172.742406] usb-storage: -- transfer complete [ 172.742408] usb-storage: Bulk status result = 0 [ 172.742411] usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x0 [ 172.742414] usb-storage: scsi cmd done, result=0x0 [ 172.742417] usb-storage: *** thread sleeping. [ 172.742436] usb-storage: queuecommand called [ 172.742440] usb-storage: *** thread awakened. [ 172.742443] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 172.742445] usb-storage: 00 00 00 00 00 00 [ 172.742452] usb-storage: Bulk Command S 0x43425355 T 0x9 L 0 F 0 Trg 0 LUN 0 CL 6 [ 172.742455] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.742528] usb-storage: Status code 0; transferred 31/31 [ 172.742531] usb-storage: -- transfer complete [ 172.742533] usb-storage: Bulk command transfer result=0 [ 172.742535] usb-storage: Attempting to get CSW... [ 172.742538] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.742652] usb-storage: Status code 0; transferred 13/13 [ 172.742654] usb-storage: -- transfer complete [ 172.742657] usb-storage: Bulk status result = 0 [ 172.742659] usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x0 [ 172.742662] usb-storage: scsi cmd done, result=0x0 [ 172.742665] usb-storage: *** thread sleeping. [ 172.742678] usb-storage: queuecommand called [ 172.742683] usb-storage: *** thread awakened. [ 172.742685] usb-storage: Command READ_CAPACITY (10 bytes) [ 172.742687] usb-storage: 25 00 00 00 00 00 00 00 00 00 [ 172.742697] usb-storage: Bulk Command S 0x43425355 T 0xa L 8 F 128 Trg 0 LUN 0 CL 10 [ 172.742700] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.742778] usb-storage: Status code 0; transferred 31/31 [ 172.742781] usb-storage: -- transfer complete [ 172.742783] usb-storage: Bulk command transfer result=0 [ 172.742786] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries [ 172.742903] usb-storage: Status code 0; transferred 8/8 [ 172.742905] usb-storage: -- transfer complete [ 172.742908] usb-storage: Bulk data transfer result 0x0 [ 172.742910] usb-storage: Attempting to get CSW... [ 172.742912] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.743028] usb-storage: Status code 0; transferred 13/13 [ 172.743030] usb-storage: -- transfer complete [ 172.743032] usb-storage: Bulk status result = 0 [ 172.743035] usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x0 [ 172.743038] usb-storage: scsi cmd done, result=0x0 [ 172.743041] usb-storage: *** thread sleeping. [ 172.743053] sd 2:0:0:0: [sdb] 4022273 512-byte hardware sectors: (2.05 GB/1.91 GiB) [ 172.743062] usb-storage: queuecommand called [ 172.743066] usb-storage: *** thread awakened. [ 172.743069] usb-storage: Command MODE_SENSE (6 bytes) [ 172.743071] usb-storage: 1a 00 3f 00 c0 00 [ 172.743078] usb-storage: Bulk Command S 0x43425355 T 0xb L 192 F 128 Trg 0 LUN 0 CL 6 [ 172.743081] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.743153] usb-storage: Status code 0; transferred 31/31 [ 172.743155] usb-storage: -- transfer complete [ 172.743158] usb-storage: Bulk command transfer result=0 [ 172.743161] usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries [ 172.743281] usb-storage: Status code -121; transferred 8/192 [ 172.743283] usb-storage: -- short read transfer [ 172.743286] usb-storage: Bulk data transfer result 0x1 [ 172.743288] usb-storage: Attempting to get CSW... [ 172.743290] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.743528] usb-storage: Status code 0; transferred 13/13 [ 172.743530] usb-storage: -- transfer complete [ 172.743532] usb-storage: Bulk status result = 0 [ 172.743535] usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x0 [ 172.743538] usb-storage: scsi cmd done, result=0x0 [ 172.743541] usb-storage: *** thread sleeping. [ 172.743552] sd 2:0:0:0: [sdb] Write Protect is off [ 172.743555] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 172.743558] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 172.743563] sdb:<7>usb-storage: queuecommand called [ 172.743605] usb-storage: *** thread awakened. [ 172.743608] usb-storage: Command READ_10 (10 bytes) [ 172.743610] usb-storage: 28 00 00 00 00 00 00 00 08 00 [ 172.743620] usb-storage: Bulk Command S 0x43425355 T 0xc L 4096 F 128 Trg 0 LUN 0 CL 10 [ 172.743623] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.743653] usb-storage: Status code 0; transferred 31/31 [ 172.743656] usb-storage: -- transfer complete [ 172.743658] usb-storage: Bulk command transfer result=0 [ 172.743661] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries [ 172.750635] usb-storage: Status code 0; transferred 4096/4096 [ 172.750639] usb-storage: -- transfer complete [ 172.750641] usb-storage: Bulk data transfer result 0x0 [ 172.750644] usb-storage: Attempting to get CSW... [ 172.750646] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.750783] usb-storage: Status code 0; transferred 13/13 [ 172.750786] usb-storage: -- transfer complete [ 172.750788] usb-storage: Bulk status result = 0 [ 172.750791] usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x0 [ 172.750795] usb-storage: scsi cmd done, result=0x0 [ 172.750799] usb-storage: *** thread sleeping. [ 172.750834] sdb1 [ 172.750884] usb-storage: queuecommand called [ 172.750890] usb-storage: *** thread awakened. [ 172.750893] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) [ 172.750895] usb-storage: 1e 00 00 00 00 00 [ 172.750906] usb-storage: Bulk Command S 0x43425355 T 0xd L 0 F 0 Trg 0 LUN 0 CL 6 [ 172.750910] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.751029] usb-storage: Status code 0; transferred 31/31 [ 172.751031] usb-storage: -- transfer complete [ 172.751033] usb-storage: Bulk command transfer result=0 [ 172.751036] usb-storage: Attempting to get CSW... [ 172.751038] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.751153] usb-storage: Status code 0; transferred 13/13 [ 172.751156] usb-storage: -- transfer complete [ 172.751158] usb-storage: Bulk status result = 0 [ 172.751161] usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x0 [ 172.751164] usb-storage: scsi cmd done, result=0x0 [ 172.751167] usb-storage: *** thread sleeping. [ 172.751257] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 172.751362] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 172.999374] usb-storage: queuecommand called [ 172.999389] usb-storage: *** thread awakened. [ 172.999393] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 172.999395] usb-storage: 00 00 00 00 00 00 [ 172.999404] usb-storage: Bulk Command S 0x43425355 T 0xe L 0 F 0 Trg 0 LUN 0 CL 6 [ 172.999408] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.999558] usb-storage: Status code 0; transferred 31/31 [ 172.999560] usb-storage: -- transfer complete [ 172.999562] usb-storage: Bulk command transfer result=0 [ 172.999565] usb-storage: Attempting to get CSW... [ 172.999567] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.999664] usb-storage: Status code 0; transferred 13/13 [ 172.999666] usb-storage: -- transfer complete [ 172.999668] usb-storage: Bulk status result = 0 [ 172.999671] usb-storage: Bulk Status S 0x53425355 T 0xe R 0 Stat 0x0 [ 172.999676] usb-storage: scsi cmd done, result=0x0 [ 172.999680] usb-storage: *** thread sleeping. [ 172.999705] usb-storage: queuecommand called [ 172.999710] usb-storage: *** thread awakened. [ 172.999713] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) [ 172.999715] usb-storage: 1e 00 00 00 01 00 [ 172.999722] usb-storage: Bulk Command S 0x43425355 T 0xf L 0 F 0 Trg 0 LUN 0 CL 6 [ 172.999726] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 172.999789] usb-storage: Status code 0; transferred 31/31 [ 172.999791] usb-storage: -- transfer complete [ 172.999793] usb-storage: Bulk command transfer result=0 [ 172.999796] usb-storage: Attempting to get CSW... [ 172.999798] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 172.999913] usb-storage: Status code 0; transferred 13/13 [ 172.999915] usb-storage: -- transfer complete [ 172.999917] usb-storage: Bulk status result = 0 [ 172.999920] usb-storage: Bulk Status S 0x53425355 T 0xf R 0 Stat 0x0 [ 172.999923] usb-storage: scsi cmd done, result=0x0 [ 172.999926] usb-storage: *** thread sleeping. [ 173.001936] usb-storage: queuecommand called [ 173.001949] usb-storage: *** thread awakened. [ 173.001952] usb-storage: Command READ_10 (10 bytes) [ 173.001954] usb-storage: 28 00 00 00 00 00 00 00 20 00 [ 173.001964] usb-storage: Bulk Command S 0x43425355 T 0x10 L 16384 F 128 Trg 0 LUN 0 CL 10 [ 173.001968] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 173.002045] usb-storage: Status code 0; transferred 31/31 [ 173.002047] usb-storage: -- transfer complete [ 173.002050] usb-storage: Bulk command transfer result=0 [ 173.002053] usb-storage: usb_stor_bulk_transfer_sglist: xfer 16384 bytes, 3 entries [ 173.005421] usb-storage: Status code 0; transferred 16384/16384 [ 173.005424] usb-storage: -- transfer complete [ 173.005427] usb-storage: Bulk data transfer result 0x0 [ 173.005429] usb-storage: Attempting to get CSW... [ 173.005432] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 173.005539] usb-storage: Status code 0; transferred 13/13 [ 173.005541] usb-storage: -- transfer complete [ 173.005543] usb-storage: Bulk status result = 0 [ 173.005546] usb-storage: Bulk Status S 0x53425355 T 0x10 R 0 Stat 0x0 [ 173.005550] usb-storage: scsi cmd done, result=0x0 [ 173.005554] usb-storage: *** thread sleeping. [ 173.005647] usb-storage: queuecommand called [ 173.005666] usb-storage: *** thread awakened. [ 173.005669] usb-storage: Command READ_10 (10 bytes) [ 173.005671] usb-storage: 28 00 00 3d 5f 80 00 00 01 00 [ 173.005681] usb-storage: Bulk Command S 0x43425355 T 0x11 L 512 F 128 Trg 0 LUN 0 CL 10 [ 173.005684] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 173.005791] usb-storage: Status code 0; transferred 31/31 [ 173.005793] usb-storage: -- transfer complete [ 173.005796] usb-storage: Bulk command transfer result=0 [ 173.005799] usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries [ 173.006290] usb-storage: Status code 0; transferred 512/512 [ 173.006292] usb-storage: -- transfer complete [ 173.006295] usb-storage: Bulk data transfer result 0x0 [ 173.006297] usb-storage: Attempting to get CSW... [ 173.006299] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 173.006412] usb-storage: Status code 0; transferred 13/13 [ 173.006414] usb-storage: -- transfer complete [ 173.006416] usb-storage: Bulk status result = 0 [ 173.006419] usb-storage: Bulk Status S 0x53425355 T 0x11 R 0 Stat 0x0 [ 173.006422] usb-storage: scsi cmd done, result=0x0 [ 173.006426] usb-storage: *** thread sleeping. [ 173.006436] usb-storage: queuecommand called [ 173.006441] usb-storage: *** thread awakened. [ 173.006444] usb-storage: Command READ_10 (10 bytes) [ 173.006446] usb-storage: 28 00 00 3d 5f 81 00 00 07 00 [ 173.006455] usb-storage: Bulk Command S 0x43425355 T 0x12 L 3584 F 128 Trg 0 LUN 0 CL 10 [ 173.006458] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 173.006537] usb-storage: Status code 0; transferred 31/31 [ 173.006539] usb-storage: -- transfer complete [ 173.006542] usb-storage: Bulk command transfer result=0 [ 173.006545] usb-storage: usb_stor_bulk_transfer_sglist: xfer 3584 bytes, 1 entries [ 173.007290] usb-storage: Status code 0; transferred 3584/3584 [ 173.007292] usb-storage: -- transfer complete [ 173.007295] usb-storage: Bulk data transfer result 0x0 [ 173.007297] usb-storage: Attempting to get CSW... [ 173.007299] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 173.007413] usb-storage: Status code 0; transferred 13/13 [ 173.007416] usb-storage: -- transfer complete [ 173.007418] usb-storage: Bulk status result = 0 [ 173.007421] usb-storage: Bulk Status S 0x53425355 T 0x12 R 0 Stat 0x0 [ 173.007424] usb-storage: scsi cmd done, result=0x0 [ 173.007427] usb-storage: *** thread sleeping. [ 173.007486] usb-storage: queuecommand called [ 173.007493] usb-storage: *** thread awakened. [ 173.007495] usb-storage: Command READ_10 (10 bytes) [ 173.007497] usb-storage: 28 00 00 3d 5f f0 00 00 08 00 [ 173.007507] usb-storage: Bulk Command S 0x43425355 T 0x13 L 4096 F 128 Trg 0 LUN 0 CL 10 [ 173.007510] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 173.007541] usb-storage: Status code 0; transferred 31/31 [ 173.007543] usb-storage: -- transfer complete [ 173.007546] usb-storage: Bulk command transfer result=0 [ 173.007549] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries [ 173.010200] usb-storage: Status code 0; transferred 4096/4096 [ 173.010203] usb-storage: -- transfer complete [ 173.010205] usb-storage: Bulk data transfer result 0x0 [ 173.010207] usb-storage: Attempting to get CSW... [ 173.010210] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 173.010290] usb-storage: Status code 0; transferred 13/13 [ 173.010292] usb-storage: -- transfer complete [ 173.010294] usb-storage: Bulk status result = 0 [ 173.010297] usb-storage: Bulk Status S 0x53425355 T 0x13 R 0 Stat 0x0 [ 173.010301] usb-storage: scsi cmd done, result=0x0 [ 173.010304] usb-storage: *** thread sleeping. [ 173.010469] usb-storage: queuecommand called [ 173.010481] usb-storage: *** thread awakened. [ 173.010483] usb-storage: Command READ_10 (10 bytes) [ 173.010486] usb-storage: 28 00 00 3d 60 00 00 00 01 00 [ 173.010495] usb-storage: Bulk Command S 0x43425355 T 0x14 L 512 F 128 Trg 0 LUN 0 CL 10 [ 173.010499] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 173.010540] usb-storage: Status code 0; transferred 31/31 [ 173.010542] usb-storage: -- transfer complete [ 173.010545] usb-storage: Bulk command transfer result=0 [ 173.010548] usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries [ 174.217353] usb-storage: Status code -32; transferred 0/512 [ 174.217359] usb-storage: clearing endpoint halt for pipe 0xc0008280 [ 174.217364] usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 [ 177.216030] usb-storage: Timeout -- cancelling URB [ 177.216185] usb-storage: usb_stor_clear_halt: result = -2 [ 177.216189] usb-storage: Bulk data transfer result 0x4 [ 177.216192] usb-storage: -- transport indicates error, resetting [ 177.216197] usb-storage: storage_pre_reset [ 177.328138] usb 4-3: reset high speed USB device using ehci_hcd and address 2 [ 192.440136] usb 4-3: device descriptor read/64, error -110 [ 203.816111] usb-storage: command_abort called [ 207.656036] usb 4-3: device descriptor read/64, error -110 [ 207.872136] usb 4-3: reset high speed USB device using ehci_hcd and address 2 [ 222.984136] usb 4-3: device descriptor read/64, error -110 [ 237.584151] usb-storage: storage_post_reset [ 237.584159] usb-storage: usb_reset_device returns -19 [ 237.584162] usb-storage: usb_stor_Bulk_reset called [ 237.584166] usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 [ 237.584170] usb-storage: Soft reset failed: -19 [ 237.584174] usb-storage: scsi cmd done, result=0x70000 [ 237.584178] usb-storage: *** thread sleeping. [ 237.584185] usb-storage: queuecommand called [ 237.584190] usb-storage: *** thread awakened. [ 237.584193] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 237.584195] usb-storage: 00 00 00 00 00 00 [ 237.584203] usb-storage: Bulk Command S 0x43425355 T 0x15 L 0 F 0 Trg 0 LUN 0 CL 6 [ 237.584206] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 237.584210] usb-storage: Status code -19; transferred 0/31 [ 237.584212] usb-storage: -- unknown error [ 237.584214] usb-storage: Bulk command transfer result=4 [ 237.584217] usb-storage: -- transport indicates error, resetting [ 237.584220] usb-storage: unable to lock device for reset: -19 [ 237.584223] usb-storage: usb_stor_Bulk_reset called [ 237.584226] usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 [ 237.584229] usb-storage: Soft reset failed: -19 [ 237.584231] usb-storage: scsi cmd done, result=0x70000 [ 237.584234] usb-storage: *** thread sleeping. [ 237.584242] usb-storage: device_reset called [ 237.584244] usb-storage: usb_stor_Bulk_reset called [ 237.584247] usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 [ 237.584250] usb-storage: Soft reset failed: -19 [ 237.584254] usb-storage: bus_reset called [ 237.584256] usb-storage: unable to lock device for reset: -19 [ 237.584260] sd 2:0:0:0: Device offlined - not ready after error recovery [ 237.584274] sd 2:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK [ 237.584280] end_request: I/O error, dev sdb, sector 4022272 [ 237.584285] Buffer I/O error on device sdb, logical block 4022272 [ 237.584308] sd 2:0:0:0: rejecting I/O to offline device [ 237.584341] sd 2:0:0:0: rejecting I/O to offline device [ 237.584345] Buffer I/O error on device sdb, logical block 4022272 [ 237.584406] sd 2:0:0:0: rejecting I/O to offline device [ 237.584410] Buffer I/O error on device sdb, logical block 4022264 [ 237.584413] Buffer I/O error on device sdb, logical block 4022265 [ 237.584417] Buffer I/O error on device sdb, logical block 4022266 [ 237.584420] Buffer I/O error on device sdb, logical block 4022267 [ 237.584423] Buffer I/O error on device sdb, logical block 4022268 [ 237.584426] Buffer I/O error on device sdb, logical block 4022269 [ 237.584430] Buffer I/O error on device sdb, logical block 4022270 [ 237.584446] sd 2:0:0:0: rejecting I/O to offline device [ 237.584466] sd 2:0:0:0: rejecting I/O to offline device [ 237.584482] sd 2:0:0:0: rejecting I/O to offline device [ 237.584499] sd 2:0:0:0: rejecting I/O to offline device [ 237.584522] sd 2:0:0:0: rejecting I/O to offline device [ 237.584552] sd 2:0:0:0: rejecting I/O to offline device [ 237.584580] sd 2:0:0:0: rejecting I/O to offline device [ 237.584597] sd 2:0:0:0: rejecting I/O to offline device [ 237.584712] sd 2:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK [ 237.584718] end_request: I/O error, dev sdb, sector 32 [ 237.584767] sd 2:0:0:0: rejecting I/O to offline device [ 237.584799] sd 2:0:0:0: rejecting I/O to offline device [ 237.584829] sd 2:0:0:0: rejecting I/O to offline device [ 237.584860] sd 2:0:0:0: rejecting I/O to offline device [ 237.584895] sd 2:0:0:0: rejecting I/O to offline device [ 237.584943] sd 2:0:0:0: rejecting I/O to offline device [ 237.584973] sd 2:0:0:0: rejecting I/O to offline device [ 237.600506] usb 4-3: USB disconnect, address 2 [ 237.600695] usb-storage: storage_disconnect() called [ 237.601058] usb-storage: -- usb_stor_release_resources [ 237.601061] usb-storage: -- sending exit command to thread [ 237.602827] usb-storage: *** thread awakened. [ 237.602833] usb-storage: -- exiting [ 237.602854] usb-storage: -- dissociate_dev lspci report: 00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) 01:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20) -- Virgo Pärna virgo.parna@xxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
