Re: mceusb xhci issue?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 15 Sep 2016, Wade Berrier wrote:

> On Thu Sep 15 15:13, Alan Stern wrote:
> > On Sat, 10 Sep 2016, Wade Berrier wrote:
> > 
> > > On Thu Aug 11 16:18, Alan Stern wrote:
> > > > I never received any replies to this message.  Should the patch I 
> > > > suggested be merged?
> > > >
> > > 
> > > Hello,
> > > 
> > > I applied this updated patch to the fedora23 4.7.2 kernel and the mceusb
> > > transceiver works as expected.
> > 
> > Thank you for testing.  Can you provide the "lsusb -v" output for the
> > troublesome IR transceiver?
> > 
> 
> Here's the output:
> 
> Bus 001 Device 006: ID 1784:0006 TopSeed Technology Corp. eHome Infrared Transceiver
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               2.00
>   bDeviceClass            0 
>   bDeviceSubClass         0 
>   bDeviceProtocol         0 
>   bMaxPacketSize0         8
>   idVendor           0x1784 TopSeed Technology Corp.
>   idProduct          0x0006 eHome Infrared Transceiver
>   bcdDevice            1.02
>   iManufacturer           1 TopSeed Technology Corp.
>   iProduct                2 eHome Infrared Transceiver
>   iSerial                 3 TS004RrP
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           32
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0 
>     bmAttributes         0xa0
>       (Bus Powered)
>       Remote Wakeup
>     MaxPower              100mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass    255 Vendor Specific Subclass
>       bInterfaceProtocol    255 Vendor Specific Protocol
>       iInterface              0 
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x01  EP 1 OUT
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0020  1x 32 bytes
>         bInterval               0

And there's the problem.  0 is an invalid bInterval value for an 
Interrupt endpoint.

>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0020  1x 32 bytes
>         bInterval               0

Here too.

> Device Status:     0x0001
>   Self Powered
> 
> Wade

Thank you.  The patch has been submitted.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux