From: Tony Lindgren <tony@xxxxxxxxxxx>
We can now just use PM runtime autoidle support as musb core
keeps things enabled when the devctl session bit is set. And
there's no need for dsps_musb_try_idle() so let's just remove
it.
Note that as cppi41 dma is clocked by musb, this only makes
PM work for dsps glue layer if CONFIG_MUSB_PIO_ONLY=y and
cppi41.ko is unloaded. This will get fixed when cppi41.c has
PM runtime implemented.
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Bin Liu <b-liu@xxxxxx>
---
drivers/usb/musb/musb_dsps.c | 58 +++++++++++++-------------------------------
1 file changed, 17 insertions(+), 41 deletions(-)
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index ef955c7..0f17d21 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -145,43 +145,6 @@ static const struct debugfs_reg32 dsps_musb_regs[] = {
{ "mode", 0xe8 },
};
-static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
-{
- struct device *dev = musb->controller;
- struct dsps_glue *glue = dev_get_drvdata(dev->parent);
-
- if (timeout == 0)
- timeout = jiffies + msecs_to_jiffies(3);
-
- /* Never idle if active, or when VBUS timeout is not set as host */
- if (musb->is_active || (musb->a_wait_bcon == 0 &&
- musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) {
- dev_dbg(musb->controller, "%s active, deleting timer\n",
- usb_otg_state_string(musb->xceiv->otg->state));
- del_timer(&glue->timer);
- glue->last_timer = jiffies;
- return;
- }
- if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE)
- return;
-
- if (!musb->g.dev.driver)
- return;
-
- if (time_after(glue->last_timer, timeout) &&
- timer_pending(&glue->timer)) {
- dev_dbg(musb->controller,
- "Longer idle timer already pending, ignoring...\n");
- return;
- }
- glue->last_timer = timeout;
-
- dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
- usb_otg_state_string(musb->xceiv->otg->state),
- jiffies_to_msecs(timeout - jiffies));
- mod_timer(&glue->timer, timeout);
-}
-
/**
* dsps_musb_enable - enable interrupts
*/
@@ -206,7 +169,6 @@ static void dsps_musb_enable(struct musb *musb)
musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
mod_timer(&glue->timer, jiffies +
msecs_to_jiffies(wrp->poll_timeout));
- dsps_musb_try_idle(musb, 0);
}
/**
@@ -236,6 +198,11 @@ static void otg_timer(unsigned long _musb)
u8 devctl;
unsigned long flags;
int skip_session = 0;
+ int err;
+
+ err = pm_runtime_get_sync(dev);
+ if (err < 0)
+ dev_err(dev, "Poll could not pm_runtime_get: %i\n", err);
/*
* We poll because DSPS IP's won't expose several OTG-critical
@@ -279,6 +246,9 @@ static void otg_timer(unsigned long _musb)
break;
}
spin_unlock_irqrestore(&musb->lock, flags);
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
}
static irqreturn_t dsps_interrupt(int irq, void *hci)
@@ -634,7 +604,6 @@ static struct musb_platform_ops dsps_ops = {
.enable = dsps_musb_enable,
.disable = dsps_musb_disable,
- .try_idle = dsps_musb_try_idle,
.set_mode = dsps_musb_set_mode,
.recover = dsps_musb_recover,
};
@@ -798,6 +767,8 @@ static int dsps_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, glue);
pm_runtime_enable(&pdev->dev);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 200);
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0) {
@@ -809,11 +780,15 @@ static int dsps_probe(struct platform_device *pdev)
if (ret)
goto err3;
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
return 0;
err3:
- pm_runtime_put(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
err2:
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return ret;
}
@@ -825,7 +800,8 @@ static int dsps_remove(struct platform_device *pdev)
platform_device_unregister(glue->musb);
/* disable usbss clocks */
- pm_runtime_put(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
