On Thu, Sep 01, 2016 at 02:32:30PM -0700, John Youn wrote: > From: Thinh Nguyen <thinhn@xxxxxxxxxxxx> > > Added ref_clk_per for writing to GUCTL.RefClkPer which > sets the period of ref_clk in nano second. > > Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx> > Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++ > drivers/usb/dwc3/core.c | 21 +++++++++++++++++++++ > drivers/usb/dwc3/core.h | 5 +++++ > drivers/usb/dwc3/dwc3-pci.c | 1 + > 4 files changed, 29 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt > index e3e6983..aa54ba7 100644 > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > @@ -50,6 +50,8 @@ Optional properties: > - snps,hird-threshold: HIRD threshold > - snps,hsphy_interface: High-Speed PHY interface selection between "utmi" for > UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3. > + - snps,ref_clk_per: value for GUTCL.RefClkPer field that sets the period of > + ref_clk in nano seconds. Use '-' rather than '_' and add a unit suffix (property-units.txt). > - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ > register for post-silicon frame length adjustment when the > fladj_30mhz_sdbnd signal is invalid or incorrect. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
