On Sun, Sep 11, 2016 at 7:16 PM, Jun Li <jun.li@xxxxxxx> wrote: > Hi Guenter > >> -----Original Message----- >> From: Guenter Roeck [mailto:groeck@xxxxxxxxxx] >> Sent: Saturday, September 10, 2016 10:23 AM >> To: Jun Li <jun.li@xxxxxxx> >> Cc: Guenter Roeck <groeck@xxxxxxxxxxxx>; Felipe Balbi >> <felipe.balbi@xxxxxxxxxxxxxxx>; Chandra Sekhar Anagani >> <chandra.sekhar.anagani@xxxxxxxxx>; Bruce Ashfield >> <bruce.ashfield@xxxxxxxxxxxxx>; Bin Gao <bin.gao@xxxxxxxxx>; Pranav Tipnis >> <pranav.tipnis@xxxxxxxxx>; Heikki Krogerus >> <heikki.krogerus@xxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx; linux- >> usb@xxxxxxxxxxxxxxx >> Subject: Re: [RFC PATCH v3 1/2] usb: typec: USB Type-C Port Manager (tcpm) >> >> On Fri, Sep 9, 2016 at 5:26 PM, Jun Li <jun.li@xxxxxxx> wrote: >> > Hi Guenter, >> > >> >> -----Original Message----- >> >> From: linux-usb-owner@xxxxxxxxxxxxxxx [mailto:linux-usb- >> >> owner@xxxxxxxxxxxxxxx] On Behalf Of Guenter Roeck >> >> Sent: Wednesday, August 24, 2016 5:11 AM >> >> To: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx> >> >> Cc: Chandra Sekhar Anagani <chandra.sekhar.anagani@xxxxxxxxx>; Bruce >> >> Ashfield <bruce.ashfield@xxxxxxxxxxxxx>; Bin Gao <bin.gao@xxxxxxxxx>; >> >> Pranav Tipnis <pranav.tipnis@xxxxxxxxx>; Heikki Krogerus >> >> <heikki.krogerus@xxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx; >> >> linux- usb@xxxxxxxxxxxxxxx; Guenter Roeck <groeck@xxxxxxxxxxxx> >> >> Subject: [RFC PATCH v3 1/2] usb: typec: USB Type-C Port Manager >> >> (tcpm) >> >> >> >> This driver implements the USB Type-C Power Delivery state machine >> >> for both source and sink ports. Alternate mode support is not fully >> >> implemented. >> >> >> >> The driver attaches to the USB Type-C class code implemented in the >> >> following patches. >> >> >> >> usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY >> >> usb: USB Type-C connector class >> >> >> >> This driver only implements the state machine. Lower level drivers >> >> are responsible for >> >> - Reporting VBUS status and activating VBUS >> >> - Setting CC lines and providing CC line status >> >> - Setting line polarity >> >> - Activating and deactivating VCONN >> >> - Setting the current limit >> >> - Activating and deactivating PD message transfers >> >> - Sending and receiving PD messages >> >> >> >> The driver provides both a functional API as well as callbacks for >> >> lower level drivers. >> >> >> >> Signed-off-by: Guenter Roeck <groeck@xxxxxxxxxxxx> >> >> --- >> > >> > A specific question, if power sink wants to request a new power level >> > after SNK_READY, how to handle it with this tcpm? >> > >> >> So far I have considered the required power level to be static, based on >> our curent implementations. That should be easy to change, though, with an >> additional API function, to be called from a low level driver. >> Do you have that requirement, and would such a function meet your needs ? >> > > So you are going to make port->tcpc->config to be dynamic to meet my need? > What would that help ? How would tcpm get informed that the power requirements changed without an API function telling it that power requirements changed ? Guenter -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html