[PATCH] usb: dwc3: OCTEON: add support for device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds support to parse probe data for
the dwc3-octeon driver using device tree. The
DWC3 IP core is found on OCTEON III processors.

Signed-off-by: Steven J. Hill <Steven.Hill@xxxxxxxxxx>
---
 drivers/usb/dwc3/Kconfig       | 10 +++++
 drivers/usb/dwc3/Makefile      |  1 +
 drivers/usb/dwc3/dwc3-octeon.c | 96 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 107 insertions(+)
 create mode 100644 drivers/usb/dwc3/dwc3-octeon.c

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index a64ce1c..99db6008 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -105,4 +105,14 @@ config USB_DWC3_ST
 	  inside (i.e. STiH407).
 	  Say 'Y' or 'M' if you have one such device.
 
+config USB_DWC3_OCTEON
+	tristate "Cavium OCTEON III Platforms"
+	depends on CAVIUM_OCTEON_SOC
+	depends on OF
+	default USB_DWC3
+	help
+	  Cavium OCTEON III SoCs with one DesignWare Core USB3 IP
+	  inside (i.e. cn71xx and cn78xx).
+	  Say 'Y' or 'M' if you have one such device.
+
 endif
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index 22420e1..f1a7a3e 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -39,3 +39,4 @@ obj-$(CONFIG_USB_DWC3_PCI)		+= dwc3-pci.o
 obj-$(CONFIG_USB_DWC3_KEYSTONE)		+= dwc3-keystone.o
 obj-$(CONFIG_USB_DWC3_OF_SIMPLE)	+= dwc3-of-simple.o
 obj-$(CONFIG_USB_DWC3_ST)		+= dwc3-st.o
+obj-$(CONFIG_USB_DWC3_OCTEON)		+= dwc3-octeon.o
diff --git a/drivers/usb/dwc3/dwc3-octeon.c b/drivers/usb/dwc3/dwc3-octeon.c
new file mode 100644
index 0000000..4339dd6
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-octeon.c
@@ -0,0 +1,96 @@
+/**
+ * dwc3-octeon.c - Cavium OCTEON III DWC3 Specific Glue Layer
+ *
+ * Copyright (C) 2016 Cavium Networks
+ *
+ * Author: Steven J. Hill <steven.hill@xxxxxxxxxx>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Inspired by dwc3-exynos.c and dwc3-st.c files.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/dma-mapping.h>
+
+struct dwc3_octeon {
+	struct device		*dev;
+	void __iomem		*usbctl;
+	int			index;
+};
+
+static int dwc3_octeon_probe(struct platform_device *pdev)
+{
+	struct device		*dev = &pdev->dev;
+	struct resource		*res;
+	struct dwc3_octeon	*octeon;
+	int			ret;
+
+	octeon = devm_kzalloc(dev, sizeof(*octeon), GFP_KERNEL);
+	if (!octeon)
+		return - ENOMEM;
+
+	/*
+	 * Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 */
+	ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64));
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, octeon);
+	octeon->dev = dev;
+
+	/* Resources for lower level OCTEON USB control. */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	octeon->usbctl = devm_ioremap_resource(dev, res);
+	if (IS_ERR(octeon->usbctl))
+		return PTR_ERR(octeon->usbctl);
+
+	/* Controller index. */
+	octeon->index = ((u64)octeon->usbctl >> 24) & 1;
+
+	return 0;
+}
+
+static int dwc3_octeon_remove(struct platform_device *pdev)
+{
+	struct dwc3_octeon *octeon = platform_get_drvdata(pdev);
+
+	octeon->usbctl = NULL;
+	octeon->index = -1;
+
+	return 0;
+}
+
+static const struct of_device_id octeon_dwc3_match[] = {
+	{ .compatible = "cavium,octeon-7130-usb-uctl", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, octeon_dwc3_match);
+
+static struct platform_driver dwc3_octeon_driver = {
+	.probe		= dwc3_octeon_probe,
+	.remove		= dwc3_octeon_remove,
+	.driver		= {
+		.name	= "octeon-dwc3",
+		.of_match_table = octeon_dwc3_match,
+		.pm	= NULL,
+	},
+};
+module_platform_driver(dwc3_octeon_driver);
+
+MODULE_ALIAS("platform:octeon-dwc3");
+MODULE_AUTHOR("Steven J. Hill <steven.hill@xxxxxxxxxx");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 OCTEON Glue Layer");
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux