If we cannot get dr_mode or no id gpio is specified simply assume
peripheral mode, as this is always safe.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v2:
-Keep sun4i_usb_phy0_get_id_det() logic as is rather then re-ordering
the switch-case
Changes in v3:
-No changes
---
drivers/phy/phy-sun4i-usb.c | 42 ++++++++++++++----------------------------
1 file changed, 14 insertions(+), 28 deletions(-)
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 02cb65e..fb2d4f3 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -124,7 +124,6 @@ struct sun4i_usb_phy_data {
bool regulator_on;
int index;
} phys[MAX_PHYS];
- int first_phy;
/* phy0 / otg related variables */
struct extcon_dev *extcon;
bool phy0_init;
@@ -326,7 +325,10 @@ static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data)
{
switch (data->dr_mode) {
case USB_DR_MODE_OTG:
- return gpiod_get_value_cansleep(data->id_det_gpio);
+ if (data->id_det_gpio)
+ return gpiod_get_value_cansleep(data->id_det_gpio);
+ else
+ return 1; /* Fallback to peripheral mode */
case USB_DR_MODE_HOST:
return 0;
case USB_DR_MODE_PERIPHERAL:
@@ -539,8 +541,7 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
{
struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
- if (args->args[0] < data->first_phy ||
- args->args[0] >= data->cfg->num_phys)
+ if (args->args[0] >= data->cfg->num_phys)
return ERR_PTR(-ENODEV);
return data->phys[args->args[0]].phy;
@@ -615,33 +616,18 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
}
data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0);
- switch (data->dr_mode) {
- case USB_DR_MODE_OTG:
- /* otg without id_det makes no sense, and is not supported */
- if (!data->id_det_gpio) {
- dev_err(dev, "usb0_id_det missing or invalid\n");
- return -ENODEV;
- }
- /* fall through */
- case USB_DR_MODE_HOST:
- case USB_DR_MODE_PERIPHERAL:
- data->extcon = devm_extcon_dev_allocate(dev,
- sun4i_usb_phy0_cable);
- if (IS_ERR(data->extcon))
- return PTR_ERR(data->extcon);
- ret = devm_extcon_dev_register(dev, data->extcon);
- if (ret) {
- dev_err(dev, "failed to register extcon: %d\n", ret);
- return ret;
- }
- break;
- default:
- dev_info(dev, "dr_mode unknown, not registering usb phy0\n");
- data->first_phy = 1;
+ data->extcon = devm_extcon_dev_allocate(dev, sun4i_usb_phy0_cable);
+ if (IS_ERR(data->extcon))
+ return PTR_ERR(data->extcon);
+
+ ret = devm_extcon_dev_register(dev, data->extcon);
+ if (ret) {
+ dev_err(dev, "failed to register extcon: %d\n", ret);
+ return ret;
}
- for (i = data->first_phy; i < data->cfg->num_phys; i++) {
+ for (i = 0; i < data->cfg->num_phys; i++) {
struct sun4i_usb_phy *phy = data->phys + i;
char name[16];
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
