USB0_DDR_BRIDGE and USB1_DDR_BRIDGE1 are needed for the related dwc2 usb controller. USB, USB0 and USB1 are needed for the PHYs. Expose these clocks to DT and comment out in clk driver. Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> --- drivers/clk/meson/gxbb.h | 10 +++++----- include/dt-bindings/clock/gxbb-clkc.h | 5 +++++ 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h index 3606e875..c66df2d 100644 --- a/drivers/clk/meson/gxbb.h +++ b/drivers/clk/meson/gxbb.h @@ -218,12 +218,12 @@ #define CLKID_AIU 47 #define CLKID_UART1 48 #define CLKID_G2D 49 -#define CLKID_USB0 50 -#define CLKID_USB1 51 +/* CLKID_USB0 */ +/* CLKID_USB1 */ #define CLKID_RESET 52 #define CLKID_NAND 53 #define CLKID_DOS_PARSER 54 -#define CLKID_USB 55 +/* CLKID_USB */ #define CLKID_VDIN1 56 #define CLKID_AHB_ARB0 57 #define CLKID_EFUSE 58 @@ -232,8 +232,8 @@ #define CLKID_AHB_CTRL_BUS 61 #define CLKID_HDMI_INTR_SYNC 62 #define CLKID_HDMI_PCLK 63 -#define CLKID_USB1_DDR_BRIDGE 64 -#define CLKID_USB0_DDR_BRIDGE 65 +/* CLKID_USB1_DDR_BRIDGE */ +/* CLKID_USB0_DDR_BRIDGE */ #define CLKID_MMC_PCLK 66 #define CLKID_DVIN 67 #define CLKID_UART2 68 diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h index 244ea6e..a03463f 100644 --- a/include/dt-bindings/clock/gxbb-clkc.h +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -10,6 +10,11 @@ #define CLKID_CLK81 12 #define CLKID_MPLL2 15 #define CLKID_ETH 36 +#define CLKID_USB0 50 +#define CLKID_USB1 51 +#define CLKID_USB 55 +#define CLKID_USB1_DDR_BRIDGE 64 +#define CLKID_USB0_DDR_BRIDGE 65 #define CLKID_SD_EMMC_A 94 #define CLKID_SD_EMMC_B 95 #define CLKID_SD_EMMC_C 96 -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
