On Monday 15 August 2016 02:43 PM, Peter Chen wrote:
We have an well-known problem that the device needs to do some power
sequence before it can be recognized by related host, the typical
example like hard-wired mmc devices and usb devices.
This power sequence is hard to be described at device tree and handled by
related host driver, so we have created a common power sequence
library to cover this requirement. The core code has supplied
some common helpers for host driver, and individual power sequence
libraries handle kinds of power sequence for devices.
pwrseq_generic is intended for general purpose of power sequence, which
handles gpios and clocks currently, and can cover regulator and pinctrl
in future. The host driver calls pwrseq_alloc_generic to create
an generic pwrseq instance.
Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
Tested-by Joshua Clayton <stillcompiling@xxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
Tested-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
MAINTAINERS | 9 ++
drivers/power/Kconfig | 1 +
drivers/power/Makefile | 1 +
drivers/power/pwrseq/Kconfig | 20 ++++
drivers/power/pwrseq/Makefile | 2 +
drivers/power/pwrseq/core.c | 62 +++++++++++++
drivers/power/pwrseq/pwrseq_generic.c | 168 ++++++++++++++++++++++++++++++++++
include/linux/power/pwrseq.h | 47 ++++++++++
8 files changed, 310 insertions(+)
create mode 100644 drivers/power/pwrseq/Kconfig
create mode 100644 drivers/power/pwrseq/Makefile
create mode 100644 drivers/power/pwrseq/core.c
create mode 100644 drivers/power/pwrseq/pwrseq_generic.c
create mode 100644 include/linux/power/pwrseq.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 1ae6c84..407254b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9283,6 +9283,15 @@ F: include/linux/pm_*
F: include/linux/powercap.h
F: drivers/powercap/
+POWER SEQUENCE LIBRARY
+M: Peter Chen <Peter.Chen@xxxxxxx>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
+L: linux-pm@xxxxxxxxxxxxxxx
+S: Maintained
+F: Documentation/devicetree/bindings/power/pwrseq/
+F: drivers/power/pwrseq/
+F: include/linux/power/pwrseq.h/
+
POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
M: Sebastian Reichel <sre@xxxxxxxxxx>
M: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index acd4a15..f6aa4fd 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -515,3 +515,4 @@ endif # POWER_SUPPLY
source "drivers/power/reset/Kconfig"
source "drivers/power/avs/Kconfig"
+source "drivers/power/pwrseq/Kconfig"
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index e46b75d..4ed2e12 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -74,3 +74,4 @@ obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o
obj-$(CONFIG_POWER_RESET) += reset/
obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
+obj-$(CONFIG_POWER_SEQUENCE) += pwrseq/
diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig
new file mode 100644
index 0000000..188729e
--- /dev/null
+++ b/drivers/power/pwrseq/Kconfig
@@ -0,0 +1,20 @@
+#
+# Power Sequence library
+#
+
+config POWER_SEQUENCE
+ bool
+
+menu "Power Sequence Support"
+
+config PWRSEQ_GENERIC
+ bool "Generic power sequence control"
+ depends on OF
+ select POWER_SEQUENCE
+ help
+ It is used for drivers which needs to do power sequence
+ (eg, turn on clock, toggle reset gpio) before the related
+ devices can be found by hardware. This generic one can be
+ used for common power sequence control.
+
+endmenu
diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile
new file mode 100644
index 0000000..ad82389
--- /dev/null
+++ b/drivers/power/pwrseq/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_POWER_SEQUENCE) += core.o
+obj-$(CONFIG_PWRSEQ_GENERIC) += pwrseq_generic.o
diff --git a/drivers/power/pwrseq/core.c b/drivers/power/pwrseq/core.c
new file mode 100644
index 0000000..dcf96c4
--- /dev/null
+++ b/drivers/power/pwrseq/core.c
@@ -0,0 +1,62 @@
+/*
+ * core.c power sequence core file
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Author: Peter Chen <peter.chen@xxxxxxx>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/power/pwrseq.h>
+
+static DEFINE_MUTEX(pwrseq_list_mutex);
+static LIST_HEAD(pwrseq_list);
+
+int pwrseq_get(struct device_node *np, struct pwrseq *p)
+{
+ if (p && p->get)
+ return p->get(np, p);
+
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL(pwrseq_get);
+
+int pwrseq_on(struct device_node *np, struct pwrseq *p)
+{
+ if (p && p->on)
+ return p->on(np, p);
+
+ return -ENOTSUPP;
+}
+EXPORT_SYMBOL(pwrseq_on);
+
+void pwrseq_off(struct pwrseq *p)
+{
+ if (p && p->off)
+ p->off(p);
+}
+EXPORT_SYMBOL(pwrseq_off);
+
+void pwrseq_put(struct pwrseq *p)
+{
+ if (p && p->put)
+ p->put(p);
+}
+EXPORT_SYMBOL(pwrseq_put);
+
+void pwrseq_free(struct pwrseq *p)
+{
+ if (p && p->free)
+ p->free(p);
+}
+EXPORT_SYMBOL(pwrseq_free);
diff --git a/drivers/power/pwrseq/pwrseq_generic.c b/drivers/power/pwrseq/pwrseq_generic.c
new file mode 100644
index 0000000..8af626f
--- /dev/null
+++ b/drivers/power/pwrseq/pwrseq_generic.c
@@ -0,0 +1,168 @@
+/*
+ * pwrseq_generic.c Generic power sequence handling
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Author: Peter Chen <peter.chen@xxxxxxx>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+
+#include <linux/power/pwrseq.h>
+
+struct pwrseq_generic {
+ struct pwrseq pwrseq;
+ struct gpio_desc *gpiod_reset;
+ struct clk *clks[PWRSEQ_MAX_CLKS];
+};
+
+#define to_generic_pwrseq(p) container_of(p, struct pwrseq_generic, pwrseq)
+
+static void pwrseq_generic_free(struct pwrseq *pwrseq)
+{
+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq);
+
+ kfree(pwrseq_gen);
+}
+
+static void pwrseq_generic_put(struct pwrseq *pwrseq)
+{
+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq);
+ int clk;
+
+ if (pwrseq_gen->gpiod_reset)
+ gpiod_put(pwrseq_gen->gpiod_reset);
+
+ for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++)
+ clk_put(pwrseq_gen->clks[clk]);
+}
+
+static void pwrseq_generic_off(struct pwrseq *pwrseq)
+{
+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq);
+ int clk;
+
+ for (clk = PWRSEQ_MAX_CLKS - 1; clk >= 0; clk--)
+ clk_disable_unprepare(pwrseq_gen->clks[clk]);
+}
+
+static int pwrseq_generic_on(struct device_node *np, struct pwrseq *pwrseq)
Ideally you shouldn't need device_node here at this stage.
I expect to extract all the resource information in _get() itself.
+{
+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq);
+ int clk, ret = 0;
+ struct gpio_desc *gpiod_reset = pwrseq_gen->gpiod_reset;
+
+ for (clk = 0; clk < PWRSEQ_MAX_CLKS && pwrseq_gen->clks[clk]; clk++) {
+ ret = clk_prepare_enable(pwrseq_gen->clks[clk]);
+ if (ret) {
+ pr_err("Can't enable clock on %s: %d\n",
+ np->full_name, ret);
+ goto err_disable_clks;
+ }
+ }
+
+ if (gpiod_reset) {
+ u32 duration_us = 50;
Why initialize to 50 ??
+
+ of_property_read_u32(np, "reset-duration-us",
+ &duration_us);
+ if (duration_us <= 10)
+ udelay(10);
+ else
+ usleep_range(duration_us, duration_us + 100);
+ gpiod_set_value(gpiod_reset, 0);
+ }
+
+ return ret;
+
+err_disable_clks:
+ while (--clk >= 0)
+ clk_disable_unprepare(pwrseq_gen->clks[clk]);
+
+ return ret;
+}
+
+static int pwrseq_generic_get(struct device_node *np, struct pwrseq *pwrseq)
+{
+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq);
+ enum of_gpio_flags flags;
+ int reset_gpio, clk, ret = 0;
+
+ for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) {
+ pwrseq_gen->clks[clk] = of_clk_get(np, clk);
+ if (IS_ERR(pwrseq_gen->clks[clk])) {
+ ret = PTR_ERR(pwrseq_gen->clks[clk]);
+ if (ret == -EPROBE_DEFER)
+ goto err_put_clks;
+ pwrseq_gen->clks[clk] = NULL;
+ break;
Do we really want to continue here, even we failed to get the clock ?
+ }
+ }
+
+ reset_gpio = of_get_named_gpio_flags(np, "reset-gpios", 0, &flags);
+ if (gpio_is_valid(reset_gpio)) {
+ unsigned long gpio_flags;
+
+ if (flags & OF_GPIO_ACTIVE_LOW)
+ gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_LOW;
+ else
+ gpio_flags = GPIOF_OUT_INIT_HIGH;
+
+ ret = gpio_request_one(reset_gpio, gpio_flags,
+ "pwrseq-reset-gpios");
+ if (ret)
+ goto err_put_clks;
+
+ pwrseq_gen->gpiod_reset = gpio_to_desc(reset_gpio);
+ } else {
+ if (reset_gpio == -ENOENT)
+ return 0;
Why are we returning success here ?
+
+ ret = reset_gpio;
+ pr_err("Failed to get reset gpio on %s, err = %d\n",
+ np->full_name, reset_gpio);
+ goto err_put_clks;
+ }
+
+ return ret;
+
+err_put_clks:
+ while (--clk >= 0)
+ clk_put(pwrseq_gen->clks[clk]);
+ return ret;
+}
+
+struct pwrseq *pwrseq_alloc_generic(void)
+{
+ struct pwrseq_generic *pwrseq_gen;
+
+ pwrseq_gen = kzalloc(sizeof(*pwrseq_gen), GFP_KERNEL);
+ if (!pwrseq_gen)
+ return ERR_PTR(-ENOMEM);
+
+ pwrseq_gen->pwrseq.get = pwrseq_generic_get;
+ pwrseq_gen->pwrseq.on = pwrseq_generic_on;
+ pwrseq_gen->pwrseq.off = pwrseq_generic_off;
+ pwrseq_gen->pwrseq.put = pwrseq_generic_put;
+ pwrseq_gen->pwrseq.free = pwrseq_generic_free;
+
+ return &pwrseq_gen->pwrseq;
+}
+EXPORT_SYMBOL_GPL(pwrseq_alloc_generic);
With recent discussion on postcore_initcall, we probably can merge
_get() and _alloc() fns.
Thanks,
Vaibhav
diff --git a/include/linux/power/pwrseq.h b/include/linux/power/pwrseq.h
new file mode 100644
index 0000000..ebb2280
--- /dev/null
+++ b/include/linux/power/pwrseq.h
@@ -0,0 +1,47 @@
+#ifndef __LINUX_PWRSEQ_H
+#define __LINUX_PWRSEQ_H
+
+#include <linux/of.h>
+
+#define PWRSEQ_MAX_CLKS 3
+
+struct pwrseq {
+ char *name;
+ struct list_head node;
+ int (*get)(struct device_node *np, struct pwrseq *p);
+ int (*on)(struct device_node *np, struct pwrseq *p);
+ void (*off)(struct pwrseq *p);
+ void (*put)(struct pwrseq *p);
+ void (*free)(struct pwrseq *p);
+};
+
+#if IS_ENABLED(CONFIG_POWER_SEQUENCE)
+int pwrseq_get(struct device_node *np, struct pwrseq *p);
+int pwrseq_on(struct device_node *np, struct pwrseq *p);
+void pwrseq_off(struct pwrseq *p);
+void pwrseq_put(struct pwrseq *p);
+void pwrseq_free(struct pwrseq *p);
+#else
+static inline int pwrseq_get(struct device_node *np, struct pwrseq *p)
+{
+ return 0;
+}
+static inline int pwrseq_on(struct device_node *np, struct pwrseq *p)
+{
+ return 0;
+}
+static inline void pwrseq_off(struct pwrseq *p) {}
+static inline void pwrseq_put(struct pwrseq *p) {}
+static inline void pwrseq_free(struct pwrseq *p) {}
+#endif /* CONFIG_POWER_SEQUENCE */
+
+#if IS_ENABLED(CONFIG_PWRSEQ_GENERIC)
+struct pwrseq *pwrseq_alloc_generic(void);
+#else
+static inline struct pwrseq *pwrseq_alloc_generic(void)
+{
+ return NULL;
+}
+#endif /* CONFIG_PWRSEQ_GENERIC */
+
+#endif /* __LINUX_PWRSEQ_H */
--
Thanks,
Vaibhav
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
