On Tue, Aug 23, 2016 at 3:00 PM, Stephen Boyd <stephen.boyd@xxxxxxxxxx> wrote:
> On Fri, Aug 5, 2016 at 2:40 PM, Stephen Boyd <stephen.boyd@xxxxxxxxxx> wrote:
>> Quoting Rob Herring (2016-07-17 19:23:55)
>>> On Thu, Jul 07, 2016 at 03:20:54PM -0700, Stephen Boyd wrote:
>>> > +-------
>>> > +
>>> > +usb {
>>> > + compatible = "vendor,usb-controller";
>>> > +
>>> > + ulpi {
>>> > + phy {
>>> > + compatible = "vendor,phy";
>>> > + ulpi-vendor = /bits/ 16 <0x1d6b>;
>>> > + ulpi-product = /bits/ 16 <0x0002>;
>>> > + };
>>> > + };
>>>
>>> I'm still having concerns about describing both phys and devices. If I
>>> have a controller with 2 ports and 2 devices attached, I'd have
>>> something like this under the USB controller:
>>>
>>> ulpi {
>>> phy@1 {
>>> };
>>> phy@2 {
>>> };
>>> };
>>
>> My understanding is there would only be one status="ok" node on the ULPI
>> bus for the single phy that a usb controller would have. At the least,
>> the kernel's ULPI layer only seems to support one ULPI phy for a
>> controller right now. So even if there are two ports, it doesn't mean
>> there are two phys.
>>
>>>
>>> dev@1 {
>>> ...
>>> };
>>>
>>> dev@2 {
>>> ...
>>> };
>>>
>>>
>>> That doesn't seem the best, but I don't have a better suggestion. Maybe
>>> the device nodes need to go under the phy nodes?
>>>
>>
>> What if we moved the dev@1 and dev@2 to another sub node like "ports" or
>> "usb-devices"? Legacy code can support having those devices directly
>> underneath the usb controller, but future users would always need to put
>> them in a different sub-node so that we can easily differentiate the
>> different busses that a usb controller node may support?
>>
>> I'm not sure I see any need to relate the phy to the ports that are on
>> the controller, but if that is needed then perhaps you're right and we
>> should move the ports underneath the phy. USB core could be modified to
>> go through the legacy path or through the phy, if it even exists, to
>> find ports.
>>
>> Do we typically do this for other phy designs like sata or pci? The phy
>> always seemed like a parallel thing to the logical bus that the phy is
>> used for.
>
> Rob does this sound ok to you?
Well, if there's only ever 1 phy under the controller, then as you had
it is fine.
Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
