From: Fabio Estevam <fabio.estevam@xxxxxxx>
clk_prepare_enable() may fail, so we should better check its return
value and propagate it in the case of failure.
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx>
---
drivers/usb/phy/phy-generic.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 980c9de..427efb5 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -144,14 +144,18 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
int usb_gen_phy_init(struct usb_phy *phy)
{
struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
+ int ret;
if (!IS_ERR(nop->vcc)) {
if (regulator_enable(nop->vcc))
dev_err(phy->dev, "Failed to enable power\n");
}
- if (!IS_ERR(nop->clk))
- clk_prepare_enable(nop->clk);
+ if (!IS_ERR(nop->clk)) {
+ ret = clk_prepare_enable(nop->clk);
+ if (ret)
+ return ret;
+ }
nop_reset(nop);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
