Am Montag, 22. August 2016, 17:17:41 schrieb Kishon Vijay Abraham I:
> Hi,
>
> On Sunday 21 August 2016 02:02 AM, Randy Li wrote:
> > It is a hardware bug in RK3288, the only way to solve it is to
> > reset the phy.
> >
> > Signed-off-by: Randy Li <ayaka@xxxxxxxxxxx>
> > ---
> >
> > drivers/phy/phy-rockchip-usb.c | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> >
> > diff --git a/drivers/phy/phy-rockchip-usb.c
> > b/drivers/phy/phy-rockchip-usb.c index 2a7381f..734987f 100644
> > --- a/drivers/phy/phy-rockchip-usb.c
> > +++ b/drivers/phy/phy-rockchip-usb.c
> > @@ -29,6 +29,7 @@
> >
> > #include <linux/reset.h>
> > #include <linux/regmap.h>
> > #include <linux/mfd/syscon.h>
> >
> > +#include <linux/delay.h>
> >
> > static int enable_usb_uart;
> >
> > @@ -64,6 +65,7 @@ struct rockchip_usb_phy {
> >
> > struct clk_hw clk480m_hw;
> > struct phy *phy;
> > bool uart_enabled;
> >
> > + struct reset_control *reset;
> >
> > };
> >
> > static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
> >
> > @@ -144,9 +146,23 @@ static int rockchip_usb_phy_power_on(struct phy
> > *_phy)
> >
> > return clk_prepare_enable(phy->clk480m);
> >
> > }
> >
> > +static int rockchip_usb_phy_reset(struct phy *_phy)
> > +{
> > + struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
> > +
> > + if (phy->reset) {
> > + reset_control_assert(phy->reset);
> > + udelay(10);
> > + reset_control_deassert(phy->reset);
> > + }
> > +
> > + return 0;
> > +}
> > +
> >
> > static const struct phy_ops ops = {
> >
> > .power_on = rockchip_usb_phy_power_on,
> > .power_off = rockchip_usb_phy_power_off,
> >
> > + .reset = rockchip_usb_phy_reset,
>
> why not just reuse the .init ops? reset can be done during initialization
> right?
The naming of power_on + power_off and init + exit probably suggests that they
are supposed to be used in pairs. (aka module_init + module_exit and probably
more)
But in fact I've seen different combinations so far (phy_init + phy_power_on
... phy_power_off + phy_exit but also phy_power_on + phy_init ... phy_exit +
phy_power_off), so I guess the semantics are not that strictly defined.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
