Re: [PATCH 4/4] ARM: dts: rockchip: Point rk3288 dwc2 usb at the full PHY reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello.

On 8/21/2016 3:19 PM, ayaka wrote:

The "host1" port (AKA the dwc2 port that isn't the OTG port) on rk3288
has a hardware errata that causes everything to get confused when we get
a remote wakeup.  We'll use the reset that's in the CRU to reset the
port when it's in a bad state.

Note that we add the reset to both dwc2 controllers even though only one
has the errata in case we find some other use for this reset that's
unrelated to the current hardware errata.  Only the host port gets the
quirk property, though.

This patch came from Doug Anderson <dianders@xxxxxxxxxxxx> originally.

   Was it signed off by him? Don't you need to keep his authorship via th
"From:" tag?

I would rather the idea comes from him, but the implementation is different. I

Then write exactly that. Because now it sounds like the patch itself was originated from him.

don't which tag would be
better? If the "From:" would be the best choice. I would resend the last two
patches.

   There's also "Suggested-by:" tag which might fit here.

Signed-off-by: Randy Li <ayaka@xxxxxxxxxxx>
[...]

MBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux