Re: [PATCH v2 7/7] musb: sunxi: Add support for platform_set_mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 19-08-16 23:30, Bin Liu wrote:
Hi,

On Mon, Aug 15, 2016 at 09:21:32PM +0200, Hans de Goede wrote:
This allows run-time dr_mode switching support via the "mode" musb
sysfs attribute.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 drivers/usb/musb/sunxi.c | 52 ++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 48 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index c6ee166..1fe7451 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -74,6 +74,7 @@
 #define SUNXI_MUSB_FL_HAS_SRAM			5
 #define SUNXI_MUSB_FL_HAS_RESET			6
 #define SUNXI_MUSB_FL_NO_CONFIGDATA		7
+#define SUNXI_MUSB_FL_PHY_MODE_PEND		8

 /* Our read/write methods need access and do not get passed in a musb ref :| */
 static struct musb *sunxi_musb;
@@ -87,6 +88,7 @@ struct sunxi_glue {
 	struct phy		*phy;
 	struct platform_device	*usb_phy;
 	struct usb_phy		*xceiv;
+	enum phy_mode		phy_mode;
 	unsigned long		flags;
 	struct work_struct	work;
 	struct extcon_dev	*extcon;
@@ -140,6 +142,9 @@ static void sunxi_musb_work(struct work_struct *work)
 			clear_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
 		}
 	}
+
+	if (test_and_clear_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags))
+		phy_set_mode(glue->phy, glue->phy_mode);
 }

 static void sunxi_musb_set_vbus(struct musb *musb, int is_on)
@@ -341,6 +346,41 @@ static void sunxi_musb_dma_controller_destroy(struct dma_controller *c)
 {
 }

+static int sunxi_musb_set_mode(struct musb *musb, u8 mode)
+{
+	struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
+	enum phy_mode new_mode;
+
+	switch (mode) {
+	case MUSB_HOST:		new_mode = PHY_MODE_USB_HOST; break;
+	case MUSB_PERIPHERAL:	new_mode = PHY_MODE_USB_DEVICE; break;
+	case MUSB_OTG:		new_mode = PHY_MODE_USB_OTG; break;

Please fix the code style as commented in patch 4/7.

Ok I will send a new version with this fixed.


+	default:
+		dev_err(musb->controller->parent,
+			"Error requested mode not supported by this kernel\n");
+		return -EINVAL;
+	}
+
+	if (glue->phy_mode == new_mode)
+		return 0;
+
+	if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE) {
+		dev_err(musb->controller->parent,
+			"Error changing modes is only supported in dual role mode\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * phy_set_mode may sleep, and we're called with a spinlock held,
+	 * so let sunxi_musb_work deal with it.
+	 */
+	glue->phy_mode = new_mode;
+	set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags);
+	schedule_work(&glue->work);

When switching from host to peripheral mode, if an usb device is still
plugged and enumerated, how do you handle the device disconnect?

The phy code will report vbus low for long enough for the musb to end
the current session. It already does this for boards which do not
have working vbus detection.

Regards,

Hans



Regards,
-Bin.

+
+	return 0;
+}
+
 /*
  * sunxi musb register layout
  * 0x00 - 0x17	fifo regs, 1 long per fifo
@@ -568,6 +608,7 @@ static const struct musb_platform_ops sunxi_musb_ops = {
 	.writew		= sunxi_musb_writew,
 	.dma_init	= sunxi_musb_dma_controller_create,
 	.dma_exit	= sunxi_musb_dma_controller_destroy,
+	.set_mode	= sunxi_musb_set_mode,
 	.set_vbus	= sunxi_musb_set_vbus,
 	.pre_root_reset_end = sunxi_musb_pre_root_reset_end,
 	.post_root_reset_end = sunxi_musb_post_root_reset_end,
@@ -614,21 +655,28 @@ static int sunxi_musb_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}

+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		return -ENOMEM;
+
 	memset(&pdata, 0, sizeof(pdata));
 	switch (usb_get_dr_mode(&pdev->dev)) {
 #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST
 	case USB_DR_MODE_HOST:
 		pdata.mode = MUSB_PORT_MODE_HOST;
+		glue->phy_mode = PHY_MODE_USB_HOST;
 		break;
 #endif
 #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_GADGET
 	case USB_DR_MODE_PERIPHERAL:
 		pdata.mode = MUSB_PORT_MODE_GADGET;
+		glue->phy_mode = PHY_MODE_USB_DEVICE;
 		break;
 #endif
 #ifdef CONFIG_USB_MUSB_DUAL_ROLE
 	case USB_DR_MODE_OTG:
 		pdata.mode = MUSB_PORT_MODE_DUAL_ROLE;
+		glue->phy_mode = PHY_MODE_USB_OTG;
 		break;
 #endif
 	default:
@@ -638,10 +686,6 @@ static int sunxi_musb_probe(struct platform_device *pdev)
 	pdata.platform_ops	= &sunxi_musb_ops;
 	pdata.config		= &sunxi_musb_hdrc_config;

-	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
-	if (!glue)
-		return -ENOMEM;
-
 	glue->dev = &pdev->dev;
 	INIT_WORK(&glue->work, sunxi_musb_work);
 	glue->host_nb.notifier_call = sunxi_musb_host_notifier;
--
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux