Re: musb: am3358: having problem with high-speed on usb1 at peripheral

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Fri, Aug 12, 2016 at 10:23:15AM +0800, ayaka wrote:
> Hello all:
>   I recently add a support for customize am3358 board using the branch
> processor-sdk-linux-03.00.00 from Ti git. But I meet a problem with musb
> at the peripheral mode.
>   I have force usb1 in peripheral mode in dts as it only have USB_DP,
> USB_DM and USBDRV connected. I start up a ether gadget using the configfs,

Do you mean USB1_DRVVBUS pin? If so, you have wrong hw design. For
peripheral mode, you should float this pin, but connect USB1_VBUS pin
instead.

Regards,
-Bin.

> But I found it would always work on the USB 2.0 full speed mode,
> even the testmode can't force it in high speed mode or it won't appear
> at host side. If I want it work at high speed mode, what should I do?
>   I also meet the DMA problem, I have to apply the "ARM: dts: am33xx: 
> fix DMA support for the second USB interface", but does patches really
> work? Although it make the error message disapear, but the mail list
> said the just make the usb back to PIO mode.
> 
> -- 
> 2.7.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux