Re: [PATCH] usb: dwc2: Add reset control to dwc2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Felipe,

On 8/10/2016 6:53 AM, Dinh Nguyen wrote:
> From: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
> 
> Allow for platforms that have a reset controller driver in place to bring
> the USB IP out of reset.
> 
> Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
> Acked-by: John Youn <johnyoun@xxxxxxxxxxxx>
> Tested-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
> ---
> Hi Felipe,
> 
> Can you please take this patch through your USB tree? This patch was dependent
> on "168d7c4e8bb2 reset: Return -ENOTSUPP when not configured" and is now in
> v3.8-rc1.
> 
> The discussion is highlight here:
> 
> https://lkml.org/lkml/2016/7/7/291
> 
> Thanks,
> Dinh
> ---
> v7: Use devm_reset_control_get_optional()
> v6: fix 80 line checkpatch warning in dev_err print
> v5: updated error conditions for not finding the reset property
> v4: use dev_dbg() if not a -EPROBE_DEFER
> v3: fix compile error
> v2: move to lowlevel_hw_init()
> ---
>  drivers/usb/dwc2/core.h     |  1 +
>  drivers/usb/dwc2/platform.c | 22 ++++++++++++++++++++++
>  2 files changed, 23 insertions(+)
> 
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index 9fae029..d645512 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -868,6 +868,7 @@ struct dwc2_hsotg {
>  	void *priv;
>  	int     irq;
>  	struct clk *clk;
> +	struct reset_control *reset;
>  
>  	unsigned int queuing_high_bandwidth:1;
>  	unsigned int srp_success:1;
> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
> index fc6f525..530959a 100644
> --- a/drivers/usb/dwc2/platform.c
> +++ b/drivers/usb/dwc2/platform.c
> @@ -45,6 +45,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/phy/phy.h>
>  #include <linux/platform_data/s3c-hsotg.h>
> +#include <linux/reset.h>
>  
>  #include <linux/usb/of.h>
>  
> @@ -337,6 +338,24 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
>  {
>  	int i, ret;
>  
> +	hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
> +	if (IS_ERR(hsotg->reset)) {
> +		ret = PTR_ERR(hsotg->reset);
> +		switch (ret) {
> +		case -ENOENT:
> +		case -ENOTSUPP:
> +			hsotg->reset = NULL;
> +			break;
> +		default:
> +			dev_err(hsotg->dev, "error getting reset control %d\n",
> +				ret);
> +			return ret;
> +		}
> +	}
> +
> +	if (hsotg->reset)
> +		reset_control_deassert(hsotg->reset);
> +
>  	/* Set default UTMI width */
>  	hsotg->phyif = GUSBCFG_PHYIF16;
>  
> @@ -434,6 +453,9 @@ static int dwc2_driver_remove(struct platform_device *dev)
>  	if (hsotg->ll_hw_enabled)
>  		dwc2_lowlevel_hw_disable(hsotg);
>  
> +	if (hsotg->reset)
> +		reset_control_assert(hsotg->reset);
> +
>  	return 0;
>  }
>  
> 

Can you take this for 4.8-rc? All the dependencies are in place now.

Thanks,
John
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux