RE: [PATCH v5 5/6] usb: chipidea: let chipidea core device of_node equal's glue layer device of_node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Peter

> -----Original Message-----
> From: linux-usb-owner@xxxxxxxxxxxxxxx [mailto:linux-usb-
> owner@xxxxxxxxxxxxxxx] On Behalf Of Peter Chen
> Sent: Wednesday, August 10, 2016 11:12 AM
> To: Stephen Boyd <stephen.boyd@xxxxxxxxxx>
> Cc: Peter Chen <peter.chen@xxxxxxx>; gregkh@xxxxxxxxxxxxxxxxxxx;
> stern@xxxxxxxxxxxxxxxxxxx; ulf.hansson@xxxxxxxxxx; broonie@xxxxxxxxxx;
> sre@xxxxxxxxxx; robh+dt@xxxxxxxxxx; shawnguo@xxxxxxxxxx;
> dbaryshkov@xxxxxxxxx; dwmw3@xxxxxxxxxxxxx; k.kozlowski@xxxxxxxxxxx; linux-
> arm-kernel@xxxxxxxxxxxxxxxxxxx; p.zabel@xxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; pawel.moll@xxxxxxx; mark.rutland@xxxxxxx;
> linux-usb@xxxxxxxxxxxxxxx; arnd@xxxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> mail@xxxxxxxxxxxxxxxxxxxxx; troy.kisky@xxxxxxxxxxxxxxxxxxx;
> festevam@xxxxxxxxx; oscar@xxxxxxxxxxxx; linux-pm@xxxxxxxxxxxxxxx;
> stillcompiling@xxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; mka@xxxxxxxxxxxx;
> Peter Chen <peter.chen@xxxxxxxxxxxxx>
> Subject: Re: [PATCH v5 5/6] usb: chipidea: let chipidea core device
> of_node equal's glue layer device of_node
> 
> On Tue, Aug 09, 2016 at 05:15:36PM -0700, Stephen Boyd wrote:
> > Quoting Peter Chen (2016-08-08 01:52:10)
> > > From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
> > >
> > > At device tree, we have no device node for chipidea core, the glue
> > > layer's node is the parent node for host and udc device. But in
> > > related driver, the parent device is chipidea core. So, in order to
> > > let the common driver get parent's node, we let the core's device
> > > node equals glue layer device node.
> > >
> > > Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
> > > Tested-by: Maciej S. Szmigiero <mail@xxxxxxxxxxxxxxxxxxxxx>
> > > Tested-by Joshua Clayton <stillcompiling@xxxxxxxxx>
> > > ---
> > >  drivers/usb/chipidea/core.c | 11 +++++++++++
> > >  1 file changed, 11 insertions(+)
> > >
> > > diff --git a/drivers/usb/chipidea/core.c
> > > b/drivers/usb/chipidea/core.c index 69426e6..b189dc7 100644
> > > --- a/drivers/usb/chipidea/core.c
> > > +++ b/drivers/usb/chipidea/core.c
> > > @@ -954,6 +954,15 @@ static int ci_hdrc_probe(struct platform_device
> *pdev)
> > >                 dev_err(dev, "unable to init phy: %d\n", ret);
> > >                 return ret;
> > >         }
> > > +       /*
> > > +        * At device tree, we have no device node for chipidea core,
> > > +        * the glue layer's node is the parent node for host and udc
> > > +        * device. But in related driver, the parent device is
> chipidea
> > > +        * core. So, in order to let the common driver get parent's
> node,
> > > +        * we let the core's device node equals glue layer's node.
> > > +        */
> > > +       if (dev->parent && dev->parent->of_node)
> > > +               dev->of_node = dev->parent->of_node;
> >
> > Can this be done earlier? Perhaps after hw_device_init() in this probe
> > routine? That would allow me to remove the awkward parent searching in
> > my ULPI DT awareness patch.
> 
> The reason why I locate it there is to avoid "goto label" for error path
> during PHY's get and initialization operation.
> 
> Ok, to simplify your work, I will change it at next version.

As iommu need this to be done even more earlier, will you consider to
put it before adding the core's platform device?

Li Jun 
> 
> --
> 
> Best Regards,
> Peter Chen
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at
> http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux