From: Janusz Dziedzic <januszx.dziedzic@xxxxxxxxx> According to Synopsys Databook 2.60a, section 8.3.4, it's stated that: The LST bit should be set to 0 (isochronous transfers normally continue until the endpoint is removed entirely, at which time an End Transfer command is used to stop the transfer). This patch makes sure that detail is observed and fixes a regression with Android Audio playback caused by recent changes to DWC3 gadget. Signed-off-by: Janusz Dziedzic <januszx.dziedzic@xxxxxxxxxxxxxxx> Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx> --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index eb820e4ab49d..7a4d4d2534d4 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -829,7 +829,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, if (!req->request.no_interrupt && !chain) trb->ctrl |= DWC3_TRB_CTRL_IOC | DWC3_TRB_CTRL_ISP_IMI; - if (last) + if (last && !usb_endpoint_xfer_isoc(dep->endpoint.desc)) trb->ctrl |= DWC3_TRB_CTRL_LST; if (chain) -- 2.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
