Re: [PATCH] musb: omap2430: do not assume balanced enable()/disable()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2 Aug 2016 03:33:34 -0700
Tony Lindgren <tony@xxxxxxxxxxx> wrote:

> * Andreas Kemnade <andreas@xxxxxxxxxxxx> [160729 11:14]:
> > The code assumes that omap2430_musb_enable() and
> > omap2430_musb_disable() is called in a balanced way. The
> > That fact is broken by the fact that musb_init_controller() calls
> > musb_platform_disable() to switch from unknown state to off state.
> 
> OK, some spelling issues with the above paragraph though :)
> 
> > That means that phy_power_off() is called first so that
> > phy->power_count gets -1 and the phy is not enabled on
> > phy_power_on(). In the probably common case of using the
> > phy_twl4030, that prevents also charging the battery and so makes
> > further kernel debugging hard.
> 
> Is this with v4.7 kernel? Also, care to describe how you hit this
> and on which hardware? Just wondering..

I got this error on the Openphoenux GTA04 phone. It has a DM3730
SoC and a TPS65950 companion. Severe charging problems were already
observed with the 4.4rc1. I do not know if that already was exactly
*this* problem. I have debugged and patched the v4.7 kernel.
How I hit the problem: Just boot an that device and try to charge
via usb.
Should I resubmit the patch with an extended commit message?

Regards,
Andreas Kemnade

Attachment: pgpqu3aTMk8ZR.pgp
Description: OpenPGP digital signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux