Hi,
On 01-08-16 10:18, Icenowy Zheng wrote:
01.08.2016, 15:27, "Hans de Goede" <hdegoede@xxxxxxxxxx>:
Hi,
On 01-08-16 09:05, Icenowy Zheng wrote:
clocks = <&ccu CLK_A64_BUS_OHCI1>,
<&ccu CLK_A64_BUS_EHCI1>,
<&ccu CLK_A64_USB_OHCI0>,
<&ccu CLK_A64_USB_OHCI1>;
On A64, EHCI requires the matched OHCI to work.
Ah, so just like on the H3 (where this also is needed
and not documented).
Yes, I feeled that A64 is like a hybrid of H3 and A33.
And OHCI1 clock requires OHCI0 clock to work.
Hmm, that one is new, can you double check this ?
SCLK_GATING_OHCI.
Gating Special Clock For OHCI(48M and 12M)
00: Clock is OFF
01: OTG-OHCI Clock is ON
10: Clock is OFF
11:OTG-OHCI and OHCI0 Clock is ON
P.113 of A64 user manual 1.0
Ah I see that looks weird, I assume that you're working
on getting the regular usb host on the A64 to work, iow
the "HCI0" block in the usb block diagram at p. 580, right ?
It could be that the ohci clock for that somehow is
tapped from the ohci clock for the "USB-OTG-HCI" block,
but:
P.113, other bits of the USBPHY_CFG_REG register:
23:22 R/W 0x0 OHCI1_12M_SRC_SEL. OHCI1 12M Source Select
00: 12M divided from 48M
01: 12M divided from 24M
10: LOSC
11: /
21:20 R/W 0x0 OHCI0_12M_SRC_SEL. OHCI0 12M Source Select
00: 12M divided from 48M
01: 12M divided from 24M
10: LOSC
11: /
Suggests that they are independent...
Have you tried to simply drop
<&ccu CLK_A64_USB_OHCI0>,
From the clocks list and check that usb-1 devices
(e.g. a mouse / keyboard) plugged directly into the
board still work ?
If it does we can simply drop it, of it does not work
then indeed we need 4 clocks because allwinner has
done something weird again.
###
Also it seems that the CLK_A64_USB_OHCI0 /
CLK_A64_USB_OHCI1 names are wrong, the datasheet
consistently (*) refers to "usb-otg-ohci" and an
"usb-ohci0" rather then ohci0 and ohci1 (**)
Except for the USBPHY_CFG_REG documentation for bits 20:23,
which I believe is an error in the datasheet.
So we should do the same in the dt-bindings IMHO.
Regards,
Hans
*) In the system address map (p. 73), "Interrupt Source" list (p.210)
in the "Bus Clock Gating Register0" doc (p. 100) and
in the usb block diagram (p. 580).
**) Unlike the H3 where usb-otg-ohci is called usb-ohci0 and
the first non otg host controller is called usb-ohci1.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
