For mobile devices, they usually require very strict power management.
Such as dwc3 controller, we should enter suspend mode when no cable plug in,
then we can power off the dwc3 controller for saving power.
Now dwc3 gadget can support suspend/resume well, but we also want to suspend/
resume the host when slave device is detached or attached.
Baolin Wang (4):
usb: host: xhci: Move the xhci quirks checking to the right place
usb: host: xhci: Introduce one new 'usb3_slow_suspend' member for
xhci private data
usb: dwc3: core: Move the mode setting to the right place
usb: dwc3: core: Support the dwc3 host suspend/resume
drivers/usb/dwc3/Kconfig | 7 +++++++
drivers/usb/dwc3/core.c | 43 ++++++++++++++++++++++++++++++++++----
drivers/usb/dwc3/core.h | 15 +++++++++++++
drivers/usb/dwc3/host.c | 32 ++++++++++++++++++++++++++++
drivers/usb/host/xhci-plat.c | 11 ++++++----
include/linux/usb/xhci_pdriver.h | 3 +++
6 files changed, 103 insertions(+), 8 deletions(-)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
