For an integration we are doing here I have needed to add the following device to use the usbserial driver. It is a Novatel OEM GPS receiver card that has on-board USB-serial capability and it works well with the default usbserial driver. The dmesg output mentioned I should forward the particulars of this device to this email address. I have also included the pertinent lsusb and dmesg output. Vendor: 0x09d7 Product: 0x0100 lsusb output: Bus 002 Device 007: ID 09d7:0100 Novatel Wireless NovAtel FlexPack GPS receiver dmesg output: [1190863.011363] usbserial: USB Serial support registered for generic [1190863.011383] usbserial_generic 2-1.8:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes. [1190863.011386] usbserial_generic 2-1.8:1.0: Tell linux-usb@xxxxxxxxxxxxxxx to add your device to a proper driver. [1190863.011388] usbserial_generic 2-1.8:1.0: generic converter detected [1190863.011540] usb 2-1.8: generic converter now attached to ttyUSB0 [1190863.011666] usb 2-1.8: generic converter now attached to ttyUSB1 [1190863.011721] usb 2-1.8: generic converter now attached to ttyUSB2 Have a great day, - Tony “GGGWARRRHHWWWW.” Chewbacca, A New Hope -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
