On Thu, Jun 30, 2016 at 07:12:55PM +0800, William Wu wrote: > Add a quirk to clear the GUSB3PIPECTL.DELAYP1TRANS bit, > which specifies whether disable delay PHY power change > from P0 to P1/P2/P3 when link state changing from U0 > to U1/U2/U3 respectively. > > Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx> > --- > Changes in v5: > - None > > Changes in v4: > - rebase on top of balbi testing/next, remove pdata (balbi) > > Changes in v3: > - None > > Changes in v2: > - None > > Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++ > drivers/usb/dwc3/core.c | 5 +++++ > drivers/usb/dwc3/core.h | 3 +++ > 3 files changed, 10 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt > index 34d13a5..bd5bef0 100644 > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > +++ b/Documentation/devicetree/bindings/usb/dwc3.txt > @@ -42,6 +42,8 @@ Optional properties: > - snps,dis_u2_freeclk_exists_quirk: when set, clear the u2_freeclk_exists > in GUSB2PHYCFG, specify that USB2 PHY doesn't provide > a free-running PHY clock. > + - snps,dis_del_phy_power_chg_quirk: when set core will change PHY power > + from P0 to P1/P2/P3 without delay. Use '-', not '_'. > - snps,phyif_utmi_quirk: when set core will set phyif UTMI+ interface. > - snps,phyif_utmi: the value to configure the core to support a UTMI+ PHY > with an 8- or 16-bit interface. Value 0 select 8-bit -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
