Hi,
On 27-06-16 23:12, Alistair Buxton wrote:
I have a USB to SATA bridge which claims to be a ASM1153. It works
fine with all the other drives I tried, but not with a Crucial MX100
512GB SSD. I can read approximately the first 1.7GB of the disk with
dd and then it stops, always at the same point. Very rarely, when I
plug it in, it does not work at all and reports bizarre disk geometry
like 0 bytes, or 250GB.
I have reproduced the problem with several different computers on both
USB 2 and USB 3 ports, with kernels from 4.2 through to 4.7-rc5 (the
latest kernel currently available).
The exact device is this one:
https://shop.pimoroni.com/products/sata-hard-drive-to-usb-adapter
Logs follow. Let me know if I can provide anything else.
A 512GB SSD drive is very likely to have a peak current way over
what can be drawn from 2 usb ports. Also note how it is reporting
write errors when you try to mount it and writing takes more current
then reading, so this is simply a powersupply problem. If you want
to connect that SSD over USB you should use an enclosure with an
external powersupply.
Regards,
Hans
When I plug it in I usually see this:
[ 32.407739] scsi 9:0:0:0: Direct-Access ASMT 2115
0 PQ: 0 ANSI: 6
[ 32.408085] sd 9:0:0:0: Attached scsi generic sg4 type 0
[ 39.142436] sd 9:0:0:0: [sdd] 1000215216 512-byte logical blocks:
(512 GB/477 GiB)
[ 39.142440] sd 9:0:0:0: [sdd] 4096-byte physical blocks
[ 39.143419] sd 9:0:0:0: [sdd] Write Protect is off
[ 39.143423] sd 9:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 39.144419] sd 9:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 39.148165] sdd: sdd1 sdd2 < sdd5 >
[ 39.151671] sd 9:0:0:0: [sdd] Attached SCSI disk
But when I try to mount the disk:
[ 45.323012] sd 9:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 45.323017] sd 9:0:0:0: [sdd] tag#0 Sense Key : Medium Error [current]
[ 45.323019] sd 9:0:0:0: [sdd] tag#0 Add. Sense: Peripheral device write fault
[ 45.323022] sd 9:0:0:0: [sdd] tag#0 CDB: Write(10) 2a 00 00 00 08
00 00 00 10 00
[ 45.323024] blk_update_request: I/O error, dev sdd, sector 2048
[ 45.323026] Buffer I/O error on dev sdd1, logical block 0, lost
async page write
[ 45.323037] Buffer I/O error on dev sdd1, logical block 1, lost
async page write
[ 45.367006] sd 9:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
[ 45.367009] sd 9:0:0:0: [sdd] tag#0 Sense Key : Medium Error [current]
[ 45.367011] sd 9:0:0:0: [sdd] tag#0 Add. Sense: Peripheral device write fault
[ 45.367013] sd 9:0:0:0: [sdd] tag#0 CDB: Write(10) 2a 00 00 00 08
38 00 00 08 00
[ 45.367014] blk_update_request: I/O error, dev sdd, sector 2104
[ 45.367016] Buffer I/O error on dev sdd1, logical block 7, lost
async page write
[ 45.406752] sd 9:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE
...etc
USB descriptors:
Bus 004 Device 003: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA
6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x174c ASMedia Technology Inc.
idProduct 0x55aa ASM1051E SATA 6Gb/s bridge, ASM1053E SATA
6Gb/s bridge, ASM1153 SATA 3Gb/s bridge
bcdDevice 1.00
iManufacturer 2 Liangteng
iProduct 3 ASM1153 USB3.0 TO SATA
iSerial 1 1153201404001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
Device Status: 0x0001
Self Powered
USB controllers in my main computer where I tested this:
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0
USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0
USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
02:00.0 USB controller: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
