Re: [PATCH 07/12] power: pwrseq: rename file name for generic driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 20, 2016 at 02:48:20PM +0200, Krzysztof Kozlowski wrote:
> On 06/17/2016 12:09 PM, Peter Chen wrote:
> > The individual driver file name is better to contain module name.
> > 
> > Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
> > ---
> >  .../power/pwrseq/{pwrseq-simple.txt => mmc-pwrseq-simple.txt}         | 0
> >  drivers/power/pwrseq/Makefile                                         | 4 ++--
> >  drivers/power/pwrseq/{pwrseq.c => core.c}                             | 0
> >  drivers/power/pwrseq/{pwrseq_simple.c => pwrseq_mmc_simple.c}         | 0
> >  4 files changed, 2 insertions(+), 2 deletions(-)
> >  rename Documentation/devicetree/bindings/power/pwrseq/{pwrseq-simple.txt => mmc-pwrseq-simple.txt} (100%)
> >  rename drivers/power/pwrseq/{pwrseq.c => core.c} (100%)
> >  rename drivers/power/pwrseq/{pwrseq_simple.c => pwrseq_mmc_simple.c} (100%)
> > 
> > diff --git a/Documentation/devicetree/bindings/power/pwrseq/pwrseq-simple.txt b/Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-simple.txt
> > similarity index 100%
> > rename from Documentation/devicetree/bindings/power/pwrseq/pwrseq-simple.txt
> > rename to Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-simple.txt
> > diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile
> > index 9e40e4b..d475e01 100644
> > --- a/drivers/power/pwrseq/Makefile
> > +++ b/drivers/power/pwrseq/Makefile
> > @@ -1,3 +1,3 @@
> > -obj-$(CONFIG_POWER_SEQ)		+= pwrseq.o
> > -obj-$(CONFIG_POWER_SEQ_SIMPLE)	+= pwrseq_simple.o
> > +obj-$(CONFIG_POWER_SEQ)		+= core.o
> > +obj-$(CONFIG_POWER_SEQ_SIMPLE)	+= pwrseq_mmc_simple.o
> 
> Although the driver was developed for MMC but it is quite generic (or
> rather - mmc independent). The name of the driver is just
> "pwrseq_simple" so I think MMC prefix is not needed.
> 

It is may be common for MMC, but not USB, or others. Eg, its reset-gpios
is just like enable-gpios. Some reset chip process needs to toggle gpio.

-- 

Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux