Re: [PATCH 00/12] power: add generic power sequence framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jun 18, 2016 at 01:29:05AM +0200, Maciej S. Szmigiero wrote:
> Hi Peter,
> 
> On 17.06.2016 12:09, Peter Chen wrote:
> > Hi all,
> > 
> > We have an well-known problem that the device needs to do some power
> > sequence before it can be recognized by related host, the typical
> > example like hard-wired mmc devices and usb devices. This power
> > sequence is hard to be described at device tree and handled by
> > related host driver, so we have created a common power sequence
> > framework to handle this requirement. The generic code is supplied
> > some common helpers from host driver, and individual power sequence
> > driver handles kinds of power sequence for devices.
> > 
> > Since the MMC has already done the similar things, and this power
> > sequence handling can be generic, we use mmc power sequence code
> > as base to create this framework.
> > 
> > This patch set is based on Krzysztof Kozlowski's RFC patch set (v4.7-rc1)
> > [1], and making some changes which can let it be generic. After that,
> > we create a generic power sequence driver for USB devices which handles
> > below things, it includes all input signals for devices I can consider.
> > 
> > - Clock and its frequencies
> > - GPIO for reset and the duration time
> > - GPIO for enable
> > - Regulator for power
> > 
> > This patch set is tested on i.mx6 sabresx evk using a dts change, I use
> > two hot-plug devices to simulate this use case. The udoo board changes
> > were tested using my last power sequence patch set. [2]
> > 
> > @Maciej S. Szmigiero, Oscar, would you please test them on imx6qdl udoo
> > boards?
> 
> Thanks for the patch set, just tested them on my UDOO Quad board and can
> confirm that USB and on-board hub work fine.
> 
> Tested-by: Maciej S. Szmigiero <mail@xxxxxxxxxxxxxxxxxxxxx>
> 
> Maciej
> 

Many thanks, Maciej.

-- 

Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux