Sedat Dilek <sedat.dilek@xxxxxxxxx> writes: > On Wed, Jun 15, 2016 at 5:51 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote: > >> sudo ./usbreset /dev/bus/usb/001/005 >> >> 001 and 005 are the Bus and Device numbers from the lsusb output. >> > > Thanks, Alan. > > I will look and test this (or adapt your) line as soon as I get in > front of my machine. > > I have seen that the corresponding "usb-port" provides a usb3-hub and > a usb2-hub, so I think I have to reset both? > Are those hubs independent? > I will re-check my outputs which I had sent here. > > Can you add an example-line to the "help-text" when invoking usbreset > with no (or wrong) device-filename argument? I noticed a while ago that the OpenWrt guys have made a few useful changes to this utility, including the ability to name the device by VID:PID. This makes it a lot easier to use: http://git.openwrt.org/?p=openwrt.git;a=blob;f=package/utils/usbreset/src/usbreset.c I've been planning to get that diff submitted to usbutils, but haven't gotten around to it yet. Yes, I move slowly ;) Bjørn -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
