The user may change the speed. Use it to replace the default one.
Signed-off-by: Hayes Wang <hayeswang@xxxxxxxxxxx>
---
drivers/net/usb/r8152.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index dcdc4fa..69d1bbfd 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -628,8 +628,11 @@ struct r8152 {
u32 tx_qlen;
u32 coalesce;
u16 ocp_base;
+ u16 speed;
u8 *intr_buff;
u8 version;
+ u8 duplex;
+ u8 autoneg;
};
enum rtl_version {
@@ -3051,9 +3054,7 @@ static void rtl_hw_phy_work_func_t(struct work_struct *work)
tp->rtl_ops.hw_phy_cfg(tp);
- rtl8152_set_speed(tp, AUTONEG_ENABLE,
- tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
- DUPLEX_FULL);
+ rtl8152_set_speed(tp, tp->autoneg, tp->speed, tp->duplex);
mutex_unlock(&tp->control);
@@ -3679,6 +3680,11 @@ static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
mutex_lock(&tp->control);
ret = rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex);
+ if (!ret) {
+ tp->autoneg = cmd->autoneg;
+ tp->speed = cmd->speed;
+ tp->duplex = cmd->duplex;
+ }
mutex_unlock(&tp->control);
@@ -4239,6 +4245,10 @@ static int rtl8152_probe(struct usb_interface *intf,
break;
}
+ tp->autoneg = AUTONEG_ENABLE;
+ tp->speed = tp->mii.supports_gmii ? SPEED_1000 : SPEED_100;
+ tp->duplex = DUPLEX_FULL;
+
intf->needs_remote_wakeup = 1;
tp->rtl_ops.init(tp);
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
